1.General summarize:
AutomaticTrain Washing System adopts to clean the dust,oil stain and otherbesmirch of the train. By using the water, cleaning agent and the brushto wash two lateral of the railroad train, include the car door with thepane. The Automatic Train Washing System is constituted by washingsystem, electricity control system, water supply system, compressed airsupply systems. It adopts the train self-draught. The train passes thewarehouse to wash and brush with the speed of 2-4 km/ h. Automaticallyproceeds railroad train two lateral washing. Wash the bodywork surfaceto have no the dust, mud with the other attachment. Wash the empress'swater to pass by to handle to behind circularly use.
2.functions:
1) This Train Washing System can auto wash the lateral extern surface.
2) This Train Washing System provides to automatically clean the train, meanwhile, manual cleaning is also possible.
3) Each working section can work manually and move from point to point.
4) This system provides to display the washing state of each working section, any failures and relevant parameter.
5)This system has the perfect system protecting function. It alsoprovides to give alarm both automatically and manually in the event of afailure.
6) This system provides the function: reuse the circulating water.
7 ) This system provides the record function: the train's number.
3.specification :
Model | FD-L03 | Work Voltage(three phase) | 380V+10%50HZ |
Washing Way | Driving-in | ControlVoltage (single Phase) | 210V +10%50HZ |
Dimension | L 4300 x W500 (cm) | Total Power | 75 Kw |
Land Area | L 6000 x W600 (cm) | Current | above 24A |
WashingCapacity: | 30 trains/day | Noise | Less than 70decibel |
Train WashingSpeed | 3-5 km/h | WorkHumidity: | Less then100% |
Weight | 30 T | WorkTemperature: | 0-50 degree |
Packing | 2*40 feet | WorkCircumstance | Out Air |
Water Supply | WaterPressure: | 0.1 Mpa | |
Flow Rate | 60ms/h | ||
Waxes watercontrast gradient | 1:150(Waterdilution) 20Kg/barrel/2600 car | ||
4. Main Equipment Character
1). Main Frame Structure:
Thewhole frame structure adopts antirust treatment and surface spraycoating treatment, and high precision jointing to extend the lifetime ofwhole system.
2). Train Diagnosis System:
ThisTrain Diagnosis System mainly diagnosis the train entrance and the sendthe signal to PLC to control the whole train washing plantautomatically. Far infrared scanning system provide accurate computersignal for PLC. It has a IP56 class of waterproof.
3). High Pressure Pre-washing System:
This system adopts stainless steel standing Multistage Centrifugal Pumps, keeping high clean affection for train.
4). Detergent Spraying System:
This system is consisted of nozzle, stainless steel pipe, pump, and container and so on.
5)Wax Spraying System:
This system mainly spray gloss wax for train before air drying system to increase the gloss and air drying effect.
6. Air Drying System:
It adopts independent work principle and adopts four sets of Fan Motor
7). Computer Control System:
Autobaseelectric control system adopts programmable controller of GermanySienmens and Low-pressure protection device of French Schneide.
8). Pneumatic Control System:
Pneumaticcontrol system is composed by pressure gauge, air pressure valve,pressure adjusting valve and oil and water separator, cylinder, etc. itmainly control vertical brush and roof brush.
