Thrust-Free Compensator
Product Features:
Compared with general sleeve, bellow or door type compensator, the product has the following characteristics:
1. The compensator produces no thrust under internal pressure (or thrust from blind plate), so the rigid bearings
on the two ends of the compensator can be smaller.
2. In order to prevent sleeve and bellow compensator from being damaged. Strict Calibration is provided in requirements of design and installation.
Therefore, an additional guide bracket shall be added before each compensator. The compensator needs no calibration,
so it is unnecessary to install additional guide bracket.
3. The compensator needs no thermal expansion for temperature preservation, so the thermal loss is lower.
4. The compensator adopts sealing materials the most advanced at home as well as logical structure of sealing surface
so that the abrasion between sealing materials and sealing surface is extremely small, which guarantees no leaking in a long time.
Product Features:
Compared with general sleeve, bellow or door type compensator, the product has the following characteristics:
1. The compensator produces no thrust under internal pressure (or thrust from blind plate), so the rigid bearings
on the two ends of the compensator can be smaller.
2. In order to prevent sleeve and bellow compensator from being damaged. Strict Calibration is provided in requirements of design and installation.
Therefore, an additional guide bracket shall be added before each compensator. The compensator needs no calibration,
so it is unnecessary to install additional guide bracket.
3. The compensator needs no thermal expansion for temperature preservation, so the thermal loss is lower.
4. The compensator adopts sealing materials the most advanced at home as well as logical structure of sealing surface
so that the abrasion between sealing materials and sealing surface is extremely small, which guarantees no leaking in a long time.
Technical Parameter:
Order | Nominal Diameter (DN) | Connection Size ( D ) | Maximum Dimension (D1) | Length (L) |
1 | 50 | 57 | 142 | 225 |
2 | 80 | 89 | 190 | 250 |
3 | 100 | 108 | 220 | 250 |
4 | 125 | 133 | 240 | 280 |
5 | 150 | 159 | 275 | 280 |
6 | 200 | 219 | 335 | 300 |
7 | 250 | 273 | 395 | 300 |
8 | 300 | 325 | 450 | 350 |
9 | 350 | 377 | 510 | 350 |
10 | 400 | 426 | 560 | 350 |
11 | 450 | 480 | 610 | 380 |
12 | 500 | 530 | 670 | 380 |
13 | 600 | 630 | 760 | 400 |
