1.Power supply: DC 12V-30V
2.8-way isolated input, high reliability and stability.
3.8-way relay dry contact output, contact current is 220V, 5A.
4.Collocated with a wireless data module inside whose transmitting distance is about 2km-3km;
5.the working frequency 433MHz (400-470MHz)(pls tell us what data rate you need ?)
6.RF power: 1000mW;
7.Receiving sensitivity: -123dBm
8.Receiving current: 60mA
9.transmitting current: 350mA
10.Data rate : 1200bps/2400bps/4800bps/19200bps (pls tell us what air baud rate you need ?)
Dimension: 145mm*90mm*40mm
III.Pin Definition:
Pin name | Pin No. | Definition | Remarks |
COM1 | 1 | GND | The ground of power supply |
2 | VCC | DC:12-30V | |
3 | - | Blank | |
4 | - | Blank | |
5 | OUT1 | The 1st way dry contact output | |
6 | |||
7 | OUT2 | The 2nd way dry contact output | |
8 | |||
9 | OUT3 | The 3rd way dry contact output | |
10 | |||
11 | OUT4 | The 4th way dry contact output | |
12 | |||
13 | OUT5 | The 5th way dry contact output | |
14 | |||
15 | OUT6 | The 6th waydry contact output | |
16 | |||
17 | OUT7 | The 7th way dry contact output | |
18 | |||
19 | OUT8 | The 8th way dry contact output | |
20 | |||
COM2 | 1 | IN1 | The 1st ON-OFF condition input |
2 | GND | ||
3 | IN2 | The 2nd ON-OFF condition input | |
4 | GND | ||
5 | IN3 | The 3rd ON-OFF condition input | |
6 | GND | ||
7 | IN4 | The 4th ON-OFF condition input | |
8 | GND | ||
9 | IN5 | The 5th ON-OFF condition input | |
10 | GND | ||
11 | IN6 | The 6th ON-OFF condition input | |
12 | GND | ||
13 | IN7 | The 7th ON-OFF condition input | |
14 | GND | ||
15 | IN8 | The 8th ON-OFF condition input | |
16 | GND |
If you have any questions ,pls ask Sarah :
sales01(at)rf-data(dot)com
Skype:rf-data
