Details:
| Type | Car Polishers |
| Certification | CE |
| Power | 220-240V |
| External Size | 53*36*24CM |
| Internal Size | 17*17*22CM |
| Voltage | 120/230/100/12(V) |
| No Load Speed | 3000r/min |
Operation steps:
1. Use the towel clean the car body (if not, when waxing, it will damage the surface of the car)
2. Fix the sponge pad with the machine.
3. Apply wax on the sponge pad equably (note: if apply too much wax on it, when waxing, it will splash out)
4. Place the polisher on the car surface, press the switch then begin to work (note: please don't press the polisher too heavy)
5. Apply wax for the car surface equably. The sequence should from the up to down. First for the top of car, then the head of the car,
last for the trunk and the door. (usually, only need to apply a thin layer of wax, if too much wax, it will influence the effect of waxing)
6. After waxing, please let wax of the car dry in the air for 10 minutes, then use the towel wipe off the surplus wax.
7. Please check the sponge pad dry or not, and make sure it without soil and sand.
8. Press the switch, then begin polishing, at this time, please don't press the machine very heavy
.gif)
