1Structure features:
1) Material: 15CrNi4MO
2) Rubber/metal sealed bearing
3) Jeurnal/rock bearing
4) Cutting element:hard alloy cutting tooth
5) Apply to soft-medium,medium-hard drilling information
6) Bit size:7 7/8",IADC code:437-517-637-617
2,products details
437
Soft Formation TCI Bits
The 437 tci bits are used to drill Iow compressive strength,very soft formations.TCI bits maximize the use of bothconical and chisel tungten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset,results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows.This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formations.The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive formations.Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
617
Medium-Hard Formation TCI Tricone bts
The 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
437
Soft Formation TCI Bits
The 437 tci bits are used to drill Iow compressive strength,very soft formations.TCI bits maximize the use of bothconical and chisel tungten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset,results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows.This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formations.The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive formations.Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
617
Medium-Hard Formation TCI Tricone bts
The 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Steel tooth
(IADC)
111, 121,131
111, 121,131
117,124,126,127,136,137
211,311
216,217, 227
TCI
TCI
(IADC)
415,435, 417,437
415,435, 417,437
515,525,535,545, 517,527,537,547
615,625,635,,617,627,637,737
512,522,532,612,622,632,732
3Payment terms
T/T and L/C are acceptable
4Transport
3Payment terms
T/T and L/C are acceptable
4Transport
1) You can choose Mode of transportation :
A:By shipment B:By air C:By train D:By truck.
2)If you like ,its our pleasure to help to find a appropriate Transport agency
5We will be grateful if you could send us the inquiries by emails.and add this formation
5We will be grateful if you could send us the inquiries by emails.and add this formation
1)the size of the tricone bit.
2)the IADC tooth model,like 537G
3)plz tell the drilling information of the layer.
4)plz tell the quantity.
Its our pleasure to serve for you,and hope to build long- term business relation ship with you in the near future!!!
