Detailed Product Description
Bare type steel cement infilled raised floor is composed of panels, pedestals, an anti-vibration gasket and screws. The panel is placed on top of the pedestals with an anti-vibration gasket and then locked in place with the screws in the corner-lock holes.
Steel Cementitious Raised Floor Description:
The standard cement infilled computer floors are used in this system. Instead of the tiles being laminated with a black conductive vinyl trim that serves as the edging, these panels have four holes drilled into each corner, where screws will secure the panels to the pedestals.
Panel size: 600x600mm and 24'' x 24''
Thickness: 33mm
Performance Selection Chart (Test in accordance with CISCA)
Bare Type Steel Cementitious Infilled Raised Floor (SCP-B)
Panel Type Concentrated Load Concentrated
Ultimate Load Uniform Load Impact Load Rolling Load
10 Passes 10000 Passes
KN LB KN LB KN/M2 LB/ M2 N LB KN LB KN LB
SCP 800B 3.6 800 10.8 2400 10 2250 550 124 2.7 600 1.8 400
SCP1000B 4.5 1000 13.5 3000 20 4500 670 150 3.6 800 2.7 600
SCP1250B 5.6 1250 16.8 3750 30 6750 670 150 4.5 1000 3.6 800
SCP1500B 6.7 1500 20.1 4500 40 9000 780 175 5.6 1250 4.5 1000
SCP2000B 8.9 2000 26.7 6000 50 11250 890 200 6.7 1500 5.6 1250
Understructure
Option1 Cross head pedestal & Border pedestal
Pedestal features three key pieces: an aluminum cross head, a solid steel rod, and a base plate. The cross head is fixed to a M18 or a M20 solid steel rod which is welded to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. For greater height you can use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness:1.2mm-2.5mm, Diameter 22mm-50mm) and provides greater load bearing capacity.
Finished Floor Height: 80mm - 1500mm. Each pedestal allows for approximately 15mm-25mm height adjustment.
Pedestal Coating: Galvanized or an Electrophoretic coating
PERFORMANCE SELECTION CHART
Bare Type Steel Cementitious Infilled Raised Floor (SCP-CL-PDT)
Item FFH(mm) Horizntal
Load
(N) Vertical Load
(18KN) Pedestal head Screw Rod Pedestal
Tube Pedestal Base
CL-PDT
80~150 80~150
+/-15 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 / 100x100mm
CL-PDT
200~500 200~500
+/-25 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 Dia. 22 or 25mm 100x100mm
CL-PDT
550~800 550~800
+/-25 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 Dia. 32mm 100x100mm
CL-PDT
850~1500 850~1500
+/-25 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 Dia. 38mm 120x120mm
Border Pedestal Similar to the flat steel head pedestal. Mainly used in the corners and borders of the installation site.
Option2 Flat steel head pedestal with gasket
This raised floor pedestal features four key pieces: a black plastic head cap (ABS/PP), a flat steel square head (75mm), a solid steel rod, and a base plate. The flat steel head is fixed to a M18 solid steel rod and then attached to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. The black plastic head cap (ABS/PP) then neatly fits on the flat square steel head.
The other option is to use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness: 1 mm-2mm, Diameter 22mm-50mm)
Finished Floor Height: 80mm -1500mm. Each pedestal allow for approximately 15~25mm height adjustment.
Pedestal Coating: Galvanized or Electrophoretic
PERFORMANCE SELECTION CHART
Bare Type Steel Cementitious Infilled Raised Floor (SCP-PG-PDT)
Item FFH(mm) HorizontalLoad(N) Vertical Load
(18KN) Pedestal head Screw Rod Pedestal Tube Pedestal Base
PG-PDT
80~150 80~150
+/-15 500 Did Not Collapse 75x75mm Flat Steel M18 Or M20 / 100x100mm
PG-PDT
200~500 200~500
+/-25 500 Did Not Collapse 75x75mm Flat Steel M18 Or
M20 Dia. 22 or 25mm 100x100mm
PG-PDT
550~800 550~800
+/-25 500 Did Not Collapse 75x75mm Flat Steel M18 Or M20 Dia. 32mm 100x100mm
PG-PDT
850~1500 850~1500
+/-25 500 Did Not Collapse 75x75mm Flat Steel M18 Or M20 Dia. 38mm 120x120mm
Option3 Bolted stringer system
Bare type steel cement infilled raised floor is composed of panels, pedestals, an anti-vibration gasket and screws. The panel is placed on top of the pedestals with an anti-vibration gasket and then locked in place with the screws in the corner-lock holes.
Steel Cementitious Raised Floor Description:
The standard cement infilled computer floors are used in this system. Instead of the tiles being laminated with a black conductive vinyl trim that serves as the edging, these panels have four holes drilled into each corner, where screws will secure the panels to the pedestals.
Panel size: 600x600mm and 24'' x 24''
Thickness: 33mm
Performance Selection Chart (Test in accordance with CISCA)
Bare Type Steel Cementitious Infilled Raised Floor (SCP-B)
Panel Type Concentrated Load Concentrated
Ultimate Load Uniform Load Impact Load Rolling Load
10 Passes 10000 Passes
KN LB KN LB KN/M2 LB/ M2 N LB KN LB KN LB
SCP 800B 3.6 800 10.8 2400 10 2250 550 124 2.7 600 1.8 400
SCP1000B 4.5 1000 13.5 3000 20 4500 670 150 3.6 800 2.7 600
SCP1250B 5.6 1250 16.8 3750 30 6750 670 150 4.5 1000 3.6 800
SCP1500B 6.7 1500 20.1 4500 40 9000 780 175 5.6 1250 4.5 1000
SCP2000B 8.9 2000 26.7 6000 50 11250 890 200 6.7 1500 5.6 1250
Understructure
Option1 Cross head pedestal & Border pedestal
Pedestal features three key pieces: an aluminum cross head, a solid steel rod, and a base plate. The cross head is fixed to a M18 or a M20 solid steel rod which is welded to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. For greater height you can use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness:1.2mm-2.5mm, Diameter 22mm-50mm) and provides greater load bearing capacity.
Finished Floor Height: 80mm - 1500mm. Each pedestal allows for approximately 15mm-25mm height adjustment.
Pedestal Coating: Galvanized or an Electrophoretic coating
PERFORMANCE SELECTION CHART
Bare Type Steel Cementitious Infilled Raised Floor (SCP-CL-PDT)
Item FFH(mm) Horizntal
Load
(N) Vertical Load
(18KN) Pedestal head Screw Rod Pedestal
Tube Pedestal Base
CL-PDT
80~150 80~150
+/-15 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 / 100x100mm
CL-PDT
200~500 200~500
+/-25 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 Dia. 22 or 25mm 100x100mm
CL-PDT
550~800 550~800
+/-25 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 Dia. 32mm 100x100mm
CL-PDT
850~1500 850~1500
+/-25 500 Did Not Collapse 70x70mmCross
Aluminum M18 Or M20 Dia. 38mm 120x120mm
Border Pedestal Similar to the flat steel head pedestal. Mainly used in the corners and borders of the installation site.
Option2 Flat steel head pedestal with gasket
This raised floor pedestal features four key pieces: a black plastic head cap (ABS/PP), a flat steel square head (75mm), a solid steel rod, and a base plate. The flat steel head is fixed to a M18 solid steel rod and then attached to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. The black plastic head cap (ABS/PP) then neatly fits on the flat square steel head.
The other option is to use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness: 1 mm-2mm, Diameter 22mm-50mm)
Finished Floor Height: 80mm -1500mm. Each pedestal allow for approximately 15~25mm height adjustment.
Pedestal Coating: Galvanized or Electrophoretic
PERFORMANCE SELECTION CHART
Bare Type Steel Cementitious Infilled Raised Floor (SCP-PG-PDT)
Item FFH(mm) HorizontalLoad(N) Vertical Load
(18KN) Pedestal head Screw Rod Pedestal Tube Pedestal Base
PG-PDT
80~150 80~150
+/-15 500 Did Not Collapse 75x75mm Flat Steel M18 Or M20 / 100x100mm
PG-PDT
200~500 200~500
+/-25 500 Did Not Collapse 75x75mm Flat Steel M18 Or
M20 Dia. 22 or 25mm 100x100mm
PG-PDT
550~800 550~800
+/-25 500 Did Not Collapse 75x75mm Flat Steel M18 Or M20 Dia. 32mm 100x100mm
PG-PDT
850~1500 850~1500
+/-25 500 Did Not Collapse 75x75mm Flat Steel M18 Or M20 Dia. 38mm 120x120mm
Option3 Bolted stringer system
