- Family of slim power entry modules that consume minimal depth behind panel
- Four compact modules each provide a different option combination
- Available non-filtered or with one of four filter circuits designed to meet a wide variety of applications
- Optional voltage selector configured for either 2 or 4 voltage selection
- Optional DPST on/off switch
- Included fuseholder accepts either single 3AG fuse or
dual metric fuses - Snap-in or flange mounting styles
Filter Types
H Models provide a basic performance dual element circuit EMI filter with minimal leakage current, suitable for medical applications, with attenuation similar to the EAH Series power inIet filter.
F Models provide a basic performance dual element circuit EMI filter, with attenuation similar to the EEA Series Power Inlet Filter.
X Models provide a high performance three element differential circuit filter, with extended EMI attenuation similar to the X Series chassis filter, suitable for bringing most digital equipment (including switching power supplies) into compliance with FCC Part 15J, Class B conducted emissions limits.
Z Models provide a premium performance three element differential circuit filter, with enhanced EMI low
frequency attenuation similar to the P Series Z models, suitable for bringing most digital equipment (including switching power supplies) into compliance with EN55022 Level B as well as FCC Part 15J. For minimum panel footprint, see theP series.
frequency attenuation similar to the P Series Z models, suitable for bringing most digital equipment (including switching power supplies) into compliance with EN55022 Level B as well as FCC Part 15J. For minimum panel footprint, see theP series.
Ordering Information
Available Part Numbers
Non-filteredModels | ||||
Voltage Selections | Flange Mount | Snap-in | ||
1 | 6VM1 | 6VM1S | 6VM1C | 6VM1SC |
2 | 6VM2 | 6VM2S | ||
4 | 6VM4 | 6VM4S | 6VM4C | 6VM4SC |
GeneralPurpose Filters | ||||
1 | 5EFM1 | 5EFM1S | 5EFM1C | 5EFM1SC |
4 | 5EFM4 | 5EFM4S | 5EFM4C | 5EFM4SC |
MedicalFilters | ||||
1 | 5EHM1 | 5EHM1S | ||
4 | 5EHM4 | 5EHM4S | ||
HighPerformance - FCC-B | ||||
1 | 3EXM1S | |||
4 | 3EXM4 | 3EXM4S | ||
PremiumPerformance - EN55022-B | ||||
1 | 3EZM1S | |||
4 | 3EZM4 | 3EZM4S |
Specifications
Maximum leakagecurrent, each Line to Ground † : | ||||
HM Models | FM Models | XM / ZM Models | ||
@ 120 VAC 60 Hz: | 2 µA | .25 mA | .30 mA | |
@ 250 VAC 50 Hz | 5 µA | .50 mA | .50 mA | |
Hipot rating (one minute): | ||||
Line to Ground | 2250 VDC | |||
Line to Line | 1450 VDC | |||
Line to Load (switch off) Unfilterd only | 2500 VAC | |||
Operating Frequency: | 50 / 60 Hz | |||
Rated Voltage(max.): | 250 VAC | |||
Rated Current @ 120VAC: | 3 to 6A | |||
Rated Current @ 250VAC | ||||
3A models: | 2A | |||
5A models: | 4A | |||
6A Switched models: | 5A | |||
6A non-switchedmodels: | 6A | |||
Required Fuse(s): | Reversible fuseholder Accepts one .25" x 1.25"(not included) or two 5 x 20mm(not included) | |||
Switch: | DPST 100,000 operations at 70A max. inrush |
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord
MA100: Power interconnect assembly
For voltage select models. 8.5" wire leads
MA101: Plug only
MA102: Strip of 100 pins for use with MA101
MA104: Individual pins for use with MA101MA302: Two Voltage Selection CardMarked 120V/240V. One card comes standard with
every 2 voltage M series moduleMA304: Four Voltage Selection CardMarked 100V/120V/230V/240V. One card comes
standard with every 4 voltage M series module
MA400: Medical safety bracket assemblyPrevents inadvertent removal of fuse(s)
MA401: Bracket only
MA402: Standoff onlyMA601 - 604: Insulating BootPlastic shroud for back of M series to prevent
inadvertent access to connections