Obstetric Central System

The other name of Fetal monitoring system is called Obstetric Central Monitoring System, Which is used to monitor Fetal Heart Rate, Toco, Fetal Movement and the waveforms of mother’s ECG, RESP, Pulse and other parameters.

Features of Obstetric Central Monitoring System
> Friendly interface and easy operation for User.
> Large-sized CRT displays patients’ physical parameters in colors.
> Graphic trends for fetal heart rate, Toco, heart rate, RESP rate, SpO2, pulse rate and NIBP.
> Waveform freezing and analysis functions.
> Storage of NIBP data and FHR, Toco, HR, TEMP, SpO2, PR, RESP rate for tabular review.
> S-T segment automatic detection and display (need support from specific bedside monitors).
> Rich alarm limits settings.


Network Connecting
> Serial connector and networking link selectable.
> Bidirectional signal transmissions between central unit and bedside monitors
> Switching between 4 beds and 8 beds according to actual monitored bed number.
> Communication speed: Each channel 9600bit/s;
> Communication distance: ≥50m


Power Supply
> Power consumption: ≤150VA；
> Main unit power: Single phase AC 220V/50Hz；
> Continuous working time: 240 hours.


Composition
> Main unit: 1 Set, see the following Reference
> Central System Software: Windows XP + SP1 patch operating system
> Jet or laser printer (optional) for output of trace and text.


Hardware Configuration Reference
Computer Configuration
> Motherboard: With PCI slot, AGP bus & INTEL chipset
> CPU: P4 1.7G or higher
> RAM: 256M DDR or larger
> Hard Disk: 40G or larger
> Display: 17” CRT Color Display
> Display Card: AGP Bus / 32M Display Card
> Power Supply: Input 220V～50Hz,3.0A Output 220V～50Hz,2.5A
> Cabinet: Vertical or Horizontal
> Sound Card: Yes (Any model, better independent type)
> Floppy Drive: 1.44M　3.5’’
> CD-ROM: Yes (Any model will do)