Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
FOR 10PA17C BMW 316i 318i E36 BMW 3 Series E36 AC compressor
Specification:
Model Number: INTL-XZC057
Car name:FOR BMW 316i 318i E36 BMW 3 Series E36
Compressor Type: 10PA17C
Grooves: PV4
Clutch DIA:126mm
Volt:12v
OEM:
DENSO
64521393407
64528290339
64528385911
64528390749
64528391136
64528391137
64528391693
147100-9990
447100-2590
447100-3170
447170-3760
447170-3820
447200-0327
447200-3400
447200-3404
447300-7410
447170-3820
1471009990
4471002590
4471003170
4471703760
4471703820
4472000327
4472003400
4472003404
4473007410
4471703820
Application for:
BMW 316i 318i E36 90-94
1990 BMW 316I 318I E36
1991 BMW 316I 318I E36
1992 BMW 316I 318I E36
1993 BMW 316I 318I E36
1994 BMW 316I 318I E36
BMW 3 Series E36, 1990-2000
1990 BMW 3 Series E36
1991 BMW 3 Series E36
1992 BMW 3 Series E36
1993 BMW 3 Series E36
1994 BMW 3 Series E36
1995 BMW 3 Series E36
1996 BMW 3 Series E36
1997 BMW 3 Series E36
1998 BMW 3 Series E36
1999 BMW 3 Series E36
2000 BMW 3 Series E36
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced
