GO YEN RCA50MM Air remote control Pulse valve

Price: 22.0~39.0 USD
Trade Term: FOB
Payment Terms: T/T,WU
Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews
Basic Info.
  • Power: Pneumatic 
  • Standard or Nonstandard: Standard 
  • Pressure: Low Pressure 
  • Structure: Diaphragm 
  • Material: Casting 
  • Temperature of Media: Normal Temperature 
  • Media: Gas 
  • Brand Name: Others 
  • Model No.: RCA50MM 
  • Place of Origin: Zhejiang  
  • Min.Order: 10 Units
  • Means of Transport: Ocean, Air, Land
Supply Capacity
  • Production Capacity: 1000 units per week
  • Packing:Plastic bags,Boxes,cartons or Customer's request
  • Delivery Date: within 15 working days after payment
Product Name:GOYEN RCA50MM Air remote control Pulse valve
RCA50MM Goyen Air remote control Pulse valve
Very high performance diaphragm valve designed to be mounted directly into the compressed air manifold. 1" and 1.5" models are supplied with outlet pipes to length specified, 3" and 3.5"models are supplied without outlet pipes.
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
Body and Dresser Nuts: Diecast Aluminium
Ferrule: 304 SS
Armature: 430FR SS
Diaphragm and Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-6 (25 & 40MM standard), Nitrile coated mild steel (76MM standard), or Viton coated mild steel (all sizes)
Refer to Q Series Solenoid product data sheet for solenoid construction details.
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.
1. MM valves are installed through the tank, refer to the appropriate template listed above.
2. To avoid any potential operational problems it is preferable that the valves are
not mounted underneath the tank where condensation may collect. All o-rings
should be coated with a silicone based lubricant or similar.
3. Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.
4. Tighten dresser nuts to 20Nm (15 ftlbs) max.
5. Tighten pipe outlets to 20 Nm (15 ftlbs).
6. Connect to pilot valve, if remotely actuated.
7. Ensure compressed air supply is dry and free from oil and dirt.
8. Check all cleaning system components are secure before applying pressure.
9. Apply moderate pressure and check for leaks.
10.Fully pressurise system.
11 .Test fire and listen for proper actuation and crisp pulse noises.
Integrally piloted valves meet the requirements of:
. Atex II 2D Mechanical
. CSA (C&US)
C22.2 No. 139-1982 UL Std No. 429
. C-Tick - integral pilots
. EMC (89/336/CE) - integral pilots

Send message to this supplier
Mr. zhao
Tel: 86-574-88871448
Mobile: 15257858856
Enter between 20 to 3,000 chatacters.
Contact Method
Fenghua Fly Automation Co.,Ltd.
Xikou Town, Ningbo, Zhejiang, China (Mainland)
Fax: 86-574-56655151
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center