2. Nylon conveyor belt physical mechanical properties:
Performance level of the cover layer | symbol | The tensile strength shall be no less than | Rate of elongation at break shall be no less than | Abrasion wear mm3 shall be no more than | |
MPa | Kgf/cm2 | ||||
Heavy; | H | 24 | 240 | 450 | 120 |
Common; | D | 18 | 180 | 400 | 100 |
Light; | L | 15 | 150 | 350 | 200 |
3. Layer to layer adhesion strength
Indicators | Inter-layers | Inter layer between Cover layer and belt carcass | |
0.8-1.5mm Thickness of cover layer 0.8-1.5mm | >1.5mm Thickness of cover layer more than 1.5mm | ||
Average value of the specimens, N/mm, no less than | 4.5 | 3.2 | 3.5 |
Min. peak value of the specimens, N/mm, no less than | 3.9 | 2.4 | 2.9 |
Note:the max. Peak value of the specimens shall be no more than 20N/mm. |
4. Nylon conveyor belt type:
It is divided into the conventional type, heat resistant type, and flame resistant type, cold resistant type, acid & alkali resistant type, and oil resistant type according to the performance of the cover rubber.
5. Nylon conveyor belt specification;
(1)Material of belt core: Cotton, Nylon, EP or Steel Cord .
CC-56, NN100, NN150, NN200, NN300, NN400
5. Nylon conveyor belt specification;
(1)Material of belt core: Cotton, Nylon, EP or Steel Cord .
CC-56, NN100, NN150, NN200, NN300, NN400
(2)Side Wall Conveyor Belt Width: 100mm-2200mm
(3)Layer of cloth: layer from 2 to 10
(4)Side Wall Conveyor Belt Cover rubber: top side: 1.5-8mm bottom side:0mm-4.5mm