Main Features
1 Imported original chassis, which is light and saves oil;
2 Large thread pitch mixing drum, realizing feeding/discharging at the idle speed, saving oil and power;
3 Imported hydraulic elements with original packaging, split hydraulic system, reliable and trustworthy;
4 Pneumatic water supply, large capacity pressure water tank, three-way water supply, point-to-point flushing, up and down free, convenient and clean water tube;
5 The vehicle's classy, bold and unconstrained design won the iF Award, the highest accolade for product industrial design;
6 Inside the cab, multi drop mechanical feeding and discharging control system at left and right side of front and rear ground is reliable and rapid;
7 Softening operation handle, wheel cover is sprayed with anti-stone-bumping coating, integral ladder is more humanized and more safe;
8 High strength, fine grain steel mixing drum and blade, with great anti-friction performance;
2 Large thread pitch mixing drum, realizing feeding/discharging at the idle speed, saving oil and power;
3 Imported hydraulic elements with original packaging, split hydraulic system, reliable and trustworthy;
4 Pneumatic water supply, large capacity pressure water tank, three-way water supply, point-to-point flushing, up and down free, convenient and clean water tube;
5 The vehicle's classy, bold and unconstrained design won the iF Award, the highest accolade for product industrial design;
6 Inside the cab, multi drop mechanical feeding and discharging control system at left and right side of front and rear ground is reliable and rapid;
7 Softening operation handle, wheel cover is sprayed with anti-stone-bumping coating, integral ladder is more humanized and more safe;
8 High strength, fine grain steel mixing drum and blade, with great anti-friction performance;
Hino 700 Concrete Mixer Truck | |||||||
Overall Specifications | model | DTA5251GJBY | |||||
Mixing Volume | 9 m3 | ||||||
Curb weight | 14070 kg | ||||||
Gross vehicle weight | 25,000 kg | ||||||
Dimensions(L×W×H) | 9070×2500×3880 | ||||||
Wheelbase | 3640+1410 | ||||||
Minimal ground clearance | ≥220 mm | ||||||
Max.speed | 90 km/h | ||||||
Front axle | 8T | ||||||
Rear axle | 13T * 2 | ||||||
Clutch | 430 diaphragm spring, pneumatic booster, hydraulic operation | ||||||
Gearbox | 9JS150TA-B Single-H operation | ||||||
Drive form | 6×4 | ||||||
Drive type | Left hand drive | ||||||
Steering gear | Hydraulic Power Steering | ||||||
Brake mode Travel brake | Dual-circuit, drum-type, pneumatic brake | ||||||
Aux. brake | Engine exhaust brake | ||||||
Parking brake | Energy storage spring brake act on middle rear axle | ||||||
Type number | 10 | ||||||
Tyre | 11.00-20 | ||||||
Rim | 8.00V-20 | ||||||
Braking distance | ≤10 m(full-load) | ||||||
(V0=30km/h) V0=18.64mph | ≤9 m(no-load0 | ||||||
Rated crewmen | 2 seat and 1 sleeper | ||||||
Engine | Engine model | P11C-UJ | |||||
Type | 6-cylinder in line, water cooled, supercharged intercooled (air-air), electric injection type | ||||||
Displacement | 10.520L | ||||||
Rated power | 259kw/2100rpm | 350hp/220.5 rad/s | |||||
Max. Torque | 1460N.m/1100rpm | 1076.90 lbf.ft/115.5 rad/s | |||||
Emission Standard | Euro III | ||||||
Mixing equipment | Mixing volume | (m3) | 9 | ||||
Rotate speed (circle/ph) | 0-16 | ||||||
Power | (m3/ph) | ≥2.7 | |||||
Remaining ratio | ≤0.38% | ||||||
Speed of In | (m3/min) | 3 | |||||
Speed of Out | (m3/min) | 2 | |||||
Filling ratio | 58.70% | ||||||
Concrete slump | (mm) | 40~230 | |||||
Water supply system | Air pressure water supply | ||||||
Water tank volume | (L) | 450 | |||||
·equipment | Hydraulic oil pump, Hydraulic motor, Reduce pump | ||||||
Other equipment | Car carries freezer, Car carries VCD and MP4, Vehicle Anti-block Brake System ABS, vehicle anti-side Anti-Rolling System ARS, fully synchronizer transmission, pull clutch, radial tyre, vehicle travelling data recorder, Global Positioning System GPS, wire control and remote control, mixing drum hydraulic pressure driving system with constant speed and automatic diagnose function. |