DIRECTIONS FOR USE:
1. Shake can vigorously before use.
2. Spray over a thick layer on the entire exterior surface of engine. The heaviest dirty parts should be first treated. Wait for 5-10 minutes.
3. Flush away dissolved deposits by pressurized water.
4. Start the engine and run idly for 5-10 minutes to make the surface dry.
This detergent has no corrosion to the plastic or rubber components under the engine cover. Avoid spray it on the polishing parts. In case of splashing, immediately flush with water. Before cleaning, electrical components should be covered to avoid immersion or dip by water.
1. Shake can vigorously before use.
2. Spray over a thick layer on the entire exterior surface of engine. The heaviest dirty parts should be first treated. Wait for 5-10 minutes.
3. Flush away dissolved deposits by pressurized water.
4. Start the engine and run idly for 5-10 minutes to make the surface dry.
This detergent has no corrosion to the plastic or rubber components under the engine cover. Avoid spray it on the polishing parts. In case of splashing, immediately flush with water. Before cleaning, electrical components should be covered to avoid immersion or dip by water.
CONTENTS UNDER PRESSURE. Avoid placing in direct sunlight. Store at the temperature below 40℃. May cause eye and skin irritation. If contacting, immediately flush with plenty of water. Do not swallow and keep out of the reach of children. Do not puncture, incinerate, or burn can.
