Detailed Product Description
1.PE foam extruder
2.Screw diameter(mm):65,90,120,150,200
3.Max output(kg/h) :120,260,400,650,1000
Large diameter PE insulation pipe foam extruder
brief introduction:
this production line is designed for producing large-diameter black-yellow PE insulting pipes which are applied to the out layer of heating pipeling, water supply pipeline and drainage pipeline.
main devices of the production line:
this production line consists of extruder, haul-off machine, vacuum calibration PE pipe supporting device and electrical control system.
parameter:
Specification | Pipe diameter (mm) | Total power (KW) | Out put(kg/h) | (L/D) ratio | Centre-height |
BL65 | 90-180 | 70 | 30-120 | 30:1 | 1000 |
BL90 | 200-420 | 110 | 50-220 | 30:1 | 1000 |
BL120 | 265-665 | 258 | 100-350 | 30:1 | 1100 |
BL150 | 760-1155 | 310 | 200-500 | 30:1 | 1200 |
BL180 | 960-1420 | 380 | 250-750 | 30:1 | 1200 |
BL200 | 1275-1800 | 450 | 300-800 | 30:1 | 1200 |
pipe specification:
| O.D of PE sleeve pipe mm | thick type | thin type | corresponding steel tube | insulating layer |
| 110 | 2.6 | 2.0 | Φ45×3.0 | ~29 |
| 125 | 2.6 | 2.0 | Φ57×3.5 | ~30 |
| 142 | 2.8 | 2.2 | Φ76×4.0 | ~38 |
| 160 | 3.0 | 2.4 | Φ89×4.0 | ~30 |
| 180 | 3.2 | 2.4 | Φ108×4.5 | ~33 |
| 200 | 3.5 | 2.5 | Φ133×4.5 | ~30 |
| 225 | 4.0 | 2.5 | Φ159×4.5 | ~39 |
| 250 | 4.5 | 3.2 | Φ159×4.5 | ~40 |
| 265 | 4.0 | 3.0 | Φ194×5.0 | ~30 |
| 310 | 4.5 | 3.2 | Φ219×6.0 | ~40 |
| 365 | 6.0 | 4.2 | Φ273×6.0 | ~40 |
| 420 | 6.5 | 4.7 | Φ325×7.0 | ~40 |
| 470 | 7.0 | 5.5 | Φ377×7.0 | ~54 |
| 550 | 8.0 | 6.0 | Φ426×7.0 | ~54 |
| 600 | 8.5 | 6.0 | Φ478×8.0 | ~55 |
| 655 | 9.0 | 6.5 | Φ529×8.0 | ~55 |
| 760 | 10.0 | 7.5 | Φ630×9.0 | ~55 |
| 850 | 12.0 | 8.0 | Φ720×11.0 | ~55 |
| 960 | 14.0 | 10.0 | Φ830×11.0 | ~60 |
| 1054 | 16.0 | 12.0 | Φ960×11.0 | ~62 |
| 1155 | 17.0 | 12.0 | Φ1000×11.0 | ~65 |
| 1275 | 17.0 | 13.0 | Φ1120×12.0 | ~65 |
| 1380 | 18.5 | 14.0 | Φ1220×12.0 | ~65 |
| 1590 | 21.5 | 15.0 | Φ1420×14.0 | ~70 |
