Thunder Tiger Redline 56H Helicopter Engine

Features :
- Thunder Tiger 9612 RL .56H Ringed Redline Heli Engine
- XC2 composite coating on cylinder liner to extend engine life and an etched criss-cross pattern to minimize friction
- Dual needle carburetor with a heat insulator mount and push-pull throttle lever
- Oversized CNC machined red anodized cylinder head
- Three year limited warranty through Hobby Services beginning at date of purchase

Specifications :
- Displacement: 0.553 cu in (9.05 cc)
- Bore: 0.906" (23mm)
- Stroke: 0.858" (21.8mm)
- RPM Range: 2,000 - 21,000
- Output: 2.23 hp @ 17,500 RPM
- Weight: 13.8oz (390g)
- Distance Between Mounting Hole Centers Same Side: 0.71" (18mm)
- Distance Between Mounting Hole Centers Opposite Side: 1.7" (43.5mm)
- Width at Mounting Tabs: 2.04" (52mm)
- Width of Crankcase Below Mounting Tabs: 1.4" (35mm)
- Length from Backplate to Front Bearing: 2.9" (73.4mm)
- Length from Backplate to end of Crankshaft: 4" (102mm)
- Height from Mounting Tab/top of Cylinder Head: 2.9" (73mm)
- Heigth from Crankcase bottom/top of Cylinder Head: 3.5" (90mm)
- Width of Cylinder Head: 1.8" (47mm)
- Carburetor Settings: NOTE, carburetor has been preset at factory and should not require large adjustments
- Needle Valve: Three turns open from closed position
- Mixture Metering Screw: No more than 1/2 turn at a time, turn clockwise to lean mixture or counter-clockwise to richen mixture

Contents :
Thunder Tiger RL .56H Ringed Helicopter Engine with R3 Redline Glow Plug, two head shims, instructions, 2.5 & 3mm hex wrenches