ISO9000:2008 certified precision module .The MRS Series is ideal for OEM applications
requiring a competitively priced, precision high voltage module.
Low noise,high stability
Aluminum case
Detachable input connector
Compact and light weight
High reliability
Both external VR or voltage control
Aluminum case
Detachable input connector
Compact and light weight
High reliability
Both external VR or voltage control
APPLICATIONS
High voltage testing
PMT,MCP,radiation counter
Electron Beam/Ion Beam
Mass spectrometry
Electrostatic chuck(ESC)
Photomultiplier Tubes
Scintillators
Electron Guns
Ion Guns
Nuclear Instruments
Electrostatic lenses
Spectroscopy
Microchannel Plates
High voltage testing
PMT,MCP,radiation counter
Electron Beam/Ion Beam
Mass spectrometry
Electrostatic chuck(ESC)
Photomultiplier Tubes
Scintillators
Electron Guns
Ion Guns
Nuclear Instruments
Electrostatic lenses
Spectroscopy
Microchannel Plates
SUMMARY
The MRS serise ie a regulated, versatile,modular HV power supply used in a wide variety
The MRS serise ie a regulated, versatile,modular HV power supply used in a wide variety
of applications including mass spectrometry and Electron Microcopes.From the OEM to the
laboratory,they are an excellent choice when you require a highiy stable output.Output
can be controlled using either an external control voltage or external variable
resistor.With a diverse range of models up to 30KV/60W,you will find something for
nearly every requirement.
SPECIFICATIONS
Input Voltage:
+24Vdc±2V. Other input voltages available on special order.
Input Current:
Less than 3A at full output.
Output Voltage:
Continuously adjustable over entire output range. Available
in either positive or negative output polarity. See table for
voltage ranges.
Output Voltage Control: Controlled by either:
1) Internal ten-turn potentiometer
2) External potentiometer 5k to 100k (set internal pot. to max.)
3) Remote differential voltage programming (0 to +10V gives
0 to full output).
Accuracy 0.1%.
Remote Control:
Remote programming Common Mode Range: 0VDC to +10VDC
Line Regulation:
0.001% for input change of 10%.
Load Regulation:
0.001% for 100μA to full load change(at maximum voltage).
Temperature Coefficient:Better than 25ppm/°C.
Stability:
<0.007%/hr at constant operating conditions after 1 hour warm-up.
Output Voltage and Current Monitors:
Voltage: 0 to +10V represents zero to full output ±1%.
Current: 0 to +10V represents zero to full output ±2%.
Temperature:
Operating: 0°C to +50°C.
Storage: -35°C to +85°C.
Connectors:
Input: 6 OR 8 pin connector (mating connector supplied).
Output: Output voltage 1-20kV: 500mm cable
Dimensions:
1.58" Hx3.94" Wx5.7”D
(42.00mmx100.00mmx143.00mm)
Input Voltage:
+24Vdc±2V. Other input voltages available on special order.
Input Current:
Less than 3A at full output.
Output Voltage:
Continuously adjustable over entire output range. Available
in either positive or negative output polarity. See table for
voltage ranges.
Output Voltage Control: Controlled by either:
1) Internal ten-turn potentiometer
2) External potentiometer 5k to 100k (set internal pot. to max.)
3) Remote differential voltage programming (0 to +10V gives
0 to full output).
Accuracy 0.1%.
Remote Control:
Remote programming Common Mode Range: 0VDC to +10VDC
Line Regulation:
0.001% for input change of 10%.
Load Regulation:
0.001% for 100μA to full load change(at maximum voltage).
Temperature Coefficient:Better than 25ppm/°C.
Stability:
<0.007%/hr at constant operating conditions after 1 hour warm-up.
Output Voltage and Current Monitors:
Voltage: 0 to +10V represents zero to full output ±1%.
Current: 0 to +10V represents zero to full output ±2%.
Temperature:
Operating: 0°C to +50°C.
Storage: -35°C to +85°C.
Connectors:
Input: 6 OR 8 pin connector (mating connector supplied).
Output: Output voltage 1-20kV: 500mm cable
Dimensions:
1.58" Hx3.94" Wx5.7”D
(42.00mmx100.00mmx143.00mm)
