Mimaki DS-1600 Direct Textile Printer (64-inch)
Introducing a high resolution system that is more ecologicallyfriendlyand provides more efficient operation than traditionalsublimationtransfer systems. The DS-1600 Textile Printer is a 64-inch"direct todye sublimation" printer that doesn't require transfermedium. A newMimaki inkset formulation creates a robust color gamutwhen applieddirectly to polyester based roll materials.
Sharp, high-quality print
Direct printing provides finer lines and sharper edges than traditional transfer systems.
Direct printing provides finer lines and sharper edges than traditional transfer systems.
Environmental-friendly
No need to use transfer paper.
No need to use transfer paper.
Reduced cost
This system requires no transferpaper orliner paper, so runningcosts are much lower than the costs oftraditional transfer systems.
This system requires no transferpaper orliner paper, so runningcosts are much lower than the costs oftraditional transfer systems.
Improved operational efficiency
The system avoidscocklingof printed transfer paper and mistakes madeby wrinklingtransfer paperwhen transferring the ink onto fabric.
The system avoidscocklingof printed transfer paper and mistakes madeby wrinklingtransfer paperwhen transferring the ink onto fabric.
Equipped with media take-up device and media feeder with a dancer roller
The tension bar moves up and down to adjust proper feeding. Suitable for continuous operation.
The tension bar moves up and down to adjust proper feeding. Suitable for continuous operation.
Ink tray
In order to prevent ink that has penetrated the fabric from marking other fabrics, a tray is provided.
In order to prevent ink that has penetrated the fabric from marking other fabrics, a tray is provided.
High-speed print heads
The head configuration isan arrayof two staggered print heads. 1-way(single ink set) for fastprintingand 2-way (dual ink set) formultipurpose printing areavailable. Inaddtion, both print modes canutilize either 4-color highspeed printingor 6-color high qualityprinting.
The head configuration isan arrayof two staggered print heads. 1-way(single ink set) for fastprintingand 2-way (dual ink set) formultipurpose printing areavailable. Inaddtion, both print modes canutilize either 4-color highspeed printingor 6-color high qualityprinting.
Fabric supply mechanism
In addition to the driveroller andfriction roller, the take-up unitand feeding unit with adancer rollercause tension in the fabric toprevent it from wrinkling.The fabricretainer holds both edges of thefabric, preventing it fromtouching theprint head.
In addition to the driveroller andfriction roller, the take-up unitand feeding unit with adancer rollercause tension in the fabric toprevent it from wrinkling.The fabricretainer holds both edges of thefabric, preventing it fromtouching theprint head.
Model | DS-1600 | ||
Print head | Method | Piezo-electric drop-on demand | |
Nozzle Configuration | Eight heads (4 x 2 lines, stagger arrangement) | ||
Resolution | 360, 540, 720 dpi | ||
Maximum printing width | 1,620mm(63.7") | ||
Head height adjustment | 1.2mm (0.04") to 10mm (0.39") | ||
Printing | 4-Colours | ||
Nozzle | 360 nozzels per colour | ||
Print mode (1*) | 6-colour printing | 360 x 360 dpi: 2/4/8 pass Bi/Uni directional | |
360 x 540 dpi: 3/6/12 pass Bi/Uni directional | |||
360 x 720 dpi: 4/8/16 pass Bi/Uni directional | |||
720 x 720 dpi: 4/8/16 pass Bi/Uni directional | |||
4-colour printing | 360 x 360 dpi: 1/2/4 pass Bi/Uni directional | ||
360 x 540 dpi: 3/6/12 pass Bi/Uni directional | |||
360 x 720 dpi: 2/4/8 pass Bi/Uni directional | |||
720 x 720 dpi: 2/4/8 pass Bi/Uni directional | |||
Ink type | Dye Sublimation | C, M, Y, K, Lc, Lm | |
Aqueous Pigment | C, M, Y, K | ||
Ink Volume (2*) | 6 colour print 1-way: 220cc x 2/colour, 2-way: 220cc x 1/colour | ||
4 colour print 1-way: 220cc x 4/colour, 2-way: 220cc x 2/colour | |||
Media | Type | Polyester / Cotton (3*) | |
Width | 200mm (7.8") - 1650mm (64.9") | ||
Thickness | Less than 7mm (0.27") | ||
Outside diameter | Less than Ø250mm (9.84") | ||
Roll weight | Less than 30kg (66lbs) | ||
Roll inside diameter | 1.5" - 3" | ||
Printing surface | Printing is possible on either sides | ||
Roll end treatment | Light adhesive tape is used to allow media to be removed | ||
Margin (roll fabric) | 10mm (0.39") ±0.5mm (0.01"), left and right side | ||
Interface | IEEE-1284 / IEEE-1394 | ||
Command | MRL-1E (ESC/PV.1 base) Mimaki original command | ||
Power requirement | AC100V to 240V ±10%, (auto voltage) 50/60Hz±1Hz | ||
Power consumption | Less than 500W | ||
Operational Environment | Temperature: 15°C (55°F) to 30°C (86°F) Humidity: 35% to 65%Rh (no condensation) | ||
Dimentions | Width | 2750mm (108.3") | |
Depth | 940mm (37.0") | ||
Height | 1350mm (53.2") | ||
Weight | 230Kg(507lbs) |