Insulated heat-shrinkable tape is made of heat-shrinkable base material and hot-melt adhesive. When heating the surface, the outside part will shrink, while the inside will melt, therefore, to bring seal and insulation protection to the protected charge-carrying entity. It is convenient installation and strong practicability and is suitable for other insulated material.
Application:
To repair the cable splice, to apply together with cable repair sleeves
To provide water repellency and seal performance for heat-shrinkable cable joints
To protect bare conductor and to deal with the short circuit when crossing the tunnel in the ice environment
To provide insulated protection on cubicle switch board and bus bar
Characteristics
1. Shrink rate:> 30%,
2. Operating temperature: -55℃~105℃,
3. Shrink Temperature: 125℃.
4. Color :1 kV:
10 kV:Red
Specification
Selection | Supply Width (mm) | Supply Thickness(mm) | Supply Length (m) | Supply color |
RSHB 1kV | 25 | 0.8±0.1 | 5 or 10 | Red,Yellow,Green,Black |
RSHB 1kV | 50 | 0.8±0.1 | 5 or 10 | |
RSHB 10kV | 25 | 1.0±0.1 | 5 or 10 | Red |
RSHB 10kV | 50 | 1.0±0.1 | 5 or 10 |
Technical Data
Property | Test Method | Typical Data |
Tensile strength | ASTM D638 | ≥10.4MPa |
Elongation | ASTM D638 | ≥200% |
Tensile after aging | ASTMD 2671/120℃, 168h | ≥10MPa |
Elongation after aging | ASTMD 2671/120℃, 168h | ≥200% |
Dielectric Strength | IEC 243 | ≥10kV/mm |
Volume Resistivity | IEC 250 | ≥1014Ω. cm |