Cement clinker is usually ground using a cement ball mill. This is essentially a large rotating drum containing grinding media - normally steel balls. As the drum rotates, the motion of the balls crushes the clinker. The drum rotates approximately once every couple of seconds.
Grinding systems are either 'open circuit' or 'closed circuit'. In an open circuit system, the feed rate of incoming clinker is adjusted to achieve the desired fineness of the product. In a closed circuit system, coarse particles are separated from the finer product and returned for further grinding.
This cement ball mill is mainly used in grinding cement finished products and raw materials and also suited to metallurgical, chemical, electricity etc. and other industrial mining enterprises. It could also be used to grind various ore materials and materials that is grindability.
Grinding systems are either 'open circuit' or 'closed circuit'. In an open circuit system, the feed rate of incoming clinker is adjusted to achieve the desired fineness of the product. In a closed circuit system, coarse particles are separated from the finer product and returned for further grinding.
This cement ball mill is mainly used in grinding cement finished products and raw materials and also suited to metallurgical, chemical, electricity etc. and other industrial mining enterprises. It could also be used to grind various ore materials and materials that is grindability.
FEATURES
1.Strong adaptability;
2. Continuous produce;
3. Broken rate large;
4. Easy to adjust the product grinding fineness etc;
5. It can not only produce with wet type, but also grind and dry simultaneously.
2. Continuous produce;
3. Broken rate large;
4. Easy to adjust the product grinding fineness etc;
5. It can not only produce with wet type, but also grind and dry simultaneously.
Specification(Dia×Length) | Rotating speed (r/min) | Feed size (mm) | Capacity(t/h) | Grinding media load(t) | Main motor | Main reducer | Weight (t) | |||
Model | Power (kw) | Rotating speed(r.p.m) | Model | Reduction ratio | ||||||
φ3.2×11 | 18.3 | ≤25 | 45~48 | 112max | YR1600-8/1430 | 1400 | 740 | JDX900 | 7.15 | 213.6 |
φ3.2×13 | 18.7 | ≤25 | 50~55 | 133max | YR1600-8/1430 | 1600 | 740 | JDX1000 | 7.15 | 237 |
φ3.4×11 | 18 | ≤25 | 45~55 | 120max | YR1600-8/1430 | 1600 | 740 | JDX1000 | 230 | |
φ3.5×13 | 17 | ≤25 | 60~65 | 156max | YR2000-8/1730 | 2000 | 740 | TS130-A-F1 | 257.6 | |
φ3.8×13 | 17 | ≤25 | 65~70 | 185 | YR2500-8/1730 | 2500 | 740 | DMG22/2500 | 313 | |
