We can produce all kinds of microfiber mop pad, Microfiber floor cleaning mop,microfiber stick Flat Mops
microfiber fringed twist mop pad,microfiber mop magic mop,micrfiber twist loop flat mop,microfiber refill floor mop,microfiber scrubbing wet mop pad,microfiber String Mop,Kentukey mop
Products description:
Composition: 80% polyester & 20% polyamide, or 70% polyester & 30% polyamide
microfiber wet mops padFringed Looped microfiber mop pad advantage:
1.Able to absorb water,grease and remove dust at the some time.
2.Excellent water and dust removal ability with its superior water and grease absorptivity,the water absorbing capacity can be 7 times as heavy as its weight.
3.Much more durable than cotton mops,multitime repeated washing.
4.Easy to get it clean and quick drying.
5.Soft and cozy,moving smoothly on the floor,making your housework more comfortable and enjoyable.
6.Anti-bacteria treatment available.
Product Size: 48x14cm,62x14cm,91x14cm,125x17cm,155x17cm,185x17cm etc. Any size is available
Regular Color: Royal blue,blue,green,yellow (or customized as buyer's requirement)
MOQ:5000pcs/customized color
Application:
Used in household, restaurant, hotel cleaning; general building cleaning, healthcare environment,public area etc.
HOW TO STRIP FLOORS
Purpose
To remove a floor finish (wax) when any of the following occurs:
a. the color begins to turn.
b. the finish begins to build up.
c. mopping, spray buffing or re-waxing does not give the results desired.
Supplies and Equipment
Treated dust mop
Brush and dust pan
Putty knife
Wet/dry vacuum
2 buckets
2 downward pressure wringers
Squeegee
Stripping solution
Fresh water (use cool water)
Commercial neutralizer(if not available, use household vinegar in proportion of 1/2 pint vinegar per 2 gallons of water.)
Procedure
1. Prepare the area:
a. Place "Floor Hazard" signs in easy-to-see locations at entrances to area being stripped.
b. Move furniture. Work around heavy furniture or equipment that cannot be moved. Tilt file cabinets and mount on blocks.
c. Sweep the floor with a treated dust mop or vacuum the floor.
d. Remove gum and other foreign material with a putty knife.
e. Place stripping pad (either household-mop.com Boss Hawg or black nylon) on the machine.
f. Set equipment in area where work will begin. In a room start in the farthest corner from the entrance.
2. Follow instructions for using the stripping solution and pour into the bucket. Use cool tap water.
Note:
Hot water can loosen tile adhesive and cause solution to dry too fast.
3. Dip mophead into stripping solution. Wring slightly so the mophead still drips a little. Fan out the mophead on the floor and start applying solution at the edges.
Note:
Most build-up is at the edges.
4. Apply the solution in a 6' to 7' arc or side to side movement to cover the area between the edges. Cover only a 100 to 125 square foot area at a time.
5. Where splashing on the walls and baseboards occurs, wipe off immediately with a damp cloth.
6. Let the solution soak on the floor 4 to 5 minutes.
7. Using the floor machine with either the household-mop.com Boss Hawg (natural fiber), Black Stripping Pad or Razorback Stripping Pad, strip the area that is covered with solution. Overlap the strokes made by the machine.
8. Use the mop and empty bucket or wet/dry vacuum to pick up dirty solution. Do not allow solution to dry on the floor.
9. Rinse area using fresh water and mophead which is slightly wrung out.
10. Clean mophead with water after the first rinsing of the floor is complete.
11. Rinse two more times with fresh water. In the final rinse add commercial neutralizer per the in instructions, if available. If not, use 1/2 pint of household vinegar to 2 gallons of water. A neutralized floor gives a much better bond of the finish to the tile.
12. Allow floor to dry. Restrip any high gloss spots.
13. Allow floor to dry at least one hour after final rinse.
Check floor to be sure it is ready for finish by wiping the hand across a section of the floor. If a white powder comes up, the floor has not been rinsed properly and must be rinsed until no white powder comes up after the floor is dry. When the white powder no longer comes up on the hand, the floor is ready to be finished (waxed).
Accomplishment
After following this procedure the floor will be free of all sealers, finishes, dirt, grime, gum, other foreign matter and have no powdery residue. The floor is then ready for finish to bond to the floor tile properly.
HOW TO STRIP FLOORS
Purpose
To remove a floor finish (wax) when any of the following occurs:
a. the color begins to turn.
b. the finish begins to build up.
c. mopping, spray buffing or re-waxing does not give the results desired.
Supplies and Equipment
Treated dust mop
Brush and dust pan
Putty knife
Wet/dry vacuum
2 buckets
2 downward pressure wringers
Squeegee
Stripping solution
Fresh water (use cool water)
Commercial neutralizer(if not available, use household vinegar in proportion of 1/2 pint vinegar per 2 gallons of water.)
Procedure
1. Prepare the area:
a. Place "Floor Hazard" signs in easy-to-see locations at entrances to area being stripped.
b. Move furniture. Work around heavy furniture or equipment that cannot be moved. Tilt file cabinets and mount on blocks.
c. Sweep the floor with a treated dust mop or vacuum the floor.
d. Remove gum and other foreign material with a putty knife.
e. Place stripping pad (either household-mop.com Boss Hawg or black nylon) on the machine.
f. Set equipment in area where work will begin. In a room start in the farthest corner from the entrance.
2. Follow instructions for using the stripping solution and pour into the bucket. Use cool tap water.
Note:
Hot water can loosen tile adhesive and cause solution to dry too fast.
3. Dip mophead into stripping solution. Wring slightly so the mophead still drips a little. Fan out the mophead on the floor and start applying solution at the edges.
Note:
Most build-up is at the edges.
4. Apply the solution in a 6' to 7' arc or side to side movement to cover the area between the edges. Cover only a 100 to 125 square foot area at a time.
5. Where splashing on the walls and baseboards occurs, wipe off immediately with a damp cloth.
6. Let the solution soak on the floor 4 to 5 minutes.
7. Using the floor machine with either the household-mop.com Boss Hawg (natural fiber), Black Stripping Pad or Razorback Stripping Pad, strip the area that is covered with solution. Overlap the strokes made by the machine.
8. Use the mop and empty bucket or wet/dry vacuum to pick up dirty solution. Do not allow solution to dry on the floor.
9. Rinse area using fresh water and mophead which is slightly wrung out.
10. Clean mophead with water after the first rinsing of the floor is complete.
11. Rinse two more times with fresh water. In the final rinse add commercial neutralizer per the in instructions, if available. If not, use 1/2 pint of household vinegar to 2 gallons of water. A neutralized floor gives a much better bond of the finish to the tile.
12. Allow floor to dry. Restrip any high gloss spots.
13. Allow floor to dry at least one hour after final rinse.
Check floor to be sure it is ready for finish by wiping the hand across a section of the floor. If a white powder comes up, the floor has not been rinsed properly and must be rinsed until no white powder comes up after the floor is dry. When the white powder no longer comes up on the hand, the floor is ready to be finished (waxed).
Accomplishment
After following this procedure the floor will be free of all sealers, finishes, dirt, grime, gum, other foreign matter and have no powdery residue. The floor is then ready for finish to bond to the floor tile properly.
PRODUCT DESPRITION | |
| We have more than 10-year experiences on cleaning products. We are a typical China supplier and have worked for home products. We also have factories in China and Thailand in order to meet customers' needs. | |
Name | Value |
| Brand | Karanfil renault dusterplymouth duster |
| Terms | FOB Ningbo |
| Place of Origin | China |
| Feature | ECO-friendly |
| Payment terms | 30% deposit before we make the production, 70% balance paid after we finished the order. |
| Order delivery | 25-30days after receiving 30% deposit |
| Packing | 1pcs/polybag,50pcs/inner box,1000 or 500 pcs/out carton |
| Shipment means | by sea, by air, by express etc. |
