Small and precise injection molding machine
32T injection molding machine
Parameters as below;
| Parameter | Unit | Parameter Value (SSF320) | |
| Screw diameter | mm | A | B |
| 22 | 25 | ||
| Screw L/D ratio | L/D | 17.7 | 15.5 |
| shot volumn (theoretical) | Cm3 | 30 | 38 |
| injection weight(PS) | g | 27 | 34 |
| plasticizing capacity | g/s | 2.6 | 3.3 |
| injection rate | g/s | 25 | 32 |
| injection pressure | Mpa | 185 | 143 |
| screw speed | rmp | 165 | |
| clamp force | KN | 320 | |
| open stroke | mm | 155 | |
| distance between tie bars (W*H) | mm | 245*195 | |
| max mould thickness | mm | 260 | |
| min mould thickness | mm | 80 | |
| ejector stroke | mm | 40 | |
| ejector force | KN | 13 | |
| ejector number | PC | 1 | |
| dia of mould location hole | mm | 55 | |
| max pump pressure | Mpa | 14 | |
| pump motor power | KW | 3 | |
| heating power | KW | 2.5 | |
| machine dimension | m | 2.80*0.86*1.35 | |
| machine weight | T | 1 | |
| oil tank capacity | L | 85 | |
Chracteristics;
a)Colorful computer controller with optional languages;
b)Chrome plated tie bars with double-cylinder balanced injection system;
c)Auto lubrication system;
d)Mould data memory system;
e)Multi-stage pressure &speed injection;
f)Back pressure adjustment device;
g)Low pressure mold protection;
h)Single hydraulic core pulling and inserting;
i)Multiple hydraulic ejector knock-out;
j)Mechanical, electrical safety device;
k)Hydraulic pressure full proportional control;
l)Automatic mould adjustment function.
Optional auxilaries;
Autoloader;
Hopper dryer;
Mold temperature controller;
Robot;
Water cooler;
Oil temperature controller;
Plastic dehumidizer;
Oil bypass filter;
Hopper magnet;
Mold clamps;
Water cooler
Clamp unit of plastic injection molding machines
Quality certificate;
Organization Chart
