This LED Lights can be automaticlly on when car doors open.
Outpower:3W
Voltage:12V/24V
Working Temp:-40 degrees~ 105 degrees
Material:Aluminium alloy casing
Life span:30,000-50,000 hours
Installation:
This LED lights can be installed at the bottom of the door flameand make sure the Len vertical with the ground ;
1.Pull down the inside door board first. Mark the suitable locationfor drilling a hole.
2.Drill the hole on the door board with our borer .
3.Inset the product from the bottom of car door ,then arrange thepower cord.
4.Install the nut through the power cord upon the hole inside;Tighten the nut;
5.Connect the power cord according to the installation guide;
6.Adjust the lamp projection to the suitable place with wrenchtool.
7.Reinstall the inside door board,then check the final effect.
