1.automatic start/stop
2.RS485 port
3.diesel generator
4.Integrating Digital
Integrating Digital, Intelligent And Network Generator Controller For Generator Hgm6120
SUMMARY
HGM6100K series generator controller integrating digital, intelligent and network techniques
is used for automatic control system of diesel generator. It can carry out functions including
automatic start/stop, data measure and alarming. The controller uses LCD display,
optional Chinese and English display interface with operation easy and reliable.
HGM6100K series generator controller uses micro-processing technique which can carry out precision measure, constant value adjustment,
timing and threshold setting and etc. of multi-parameters. It can be widely used in all types of generator automatic control system for
compact structure, advanced circuits, simple connections and high reliability.
PERFORMANCE AND CHARACTERISTICS
HGM6100K controller has two types:
HGM6110K: ASM (Automatic Start Module)
HGM6120K: AMF (Automatic Mains Failure Module)
Using microprocessor as a core, graphics LCD with big screen and backlight,
display between Chinese and English, key touch for operation.
Have a RS485 port, can used for communicate to PC.
Precision measure and display of
Mains voltage
Mains frequency (Hz)
Mains current
Generator voltage
Generator current
Generator frequency (Hz)
Generator active power (kW)
Generator inactive power (kVar)
Generator apparent power (kVA)
Generator power factor
Generator starts count
Generator hours count
Generator cumulate electric energy (kWh)
Generator temperature
Generator pressure
Generator fuel level
Start battery voltage
Configurable single -phase 2 wires or 2-phase 3 wires or 3-phase 4 wires AC system input;
Control protection: Automatic start/stop, load transfer and alarming of generator;
Parameters setting: Allow user to modify setting and store them inside internal FLASH memory,
the parameters can not be lost even with power down. All parameters can be set from the front panel,
or be set by PC used SG72;
Three channel analog inputs, may joint with Resistive-type temperature/ pressure/ fuel level sensors,
several temperature and pressure sensors can be used directly (ie. VDO, DATCON, CUMMINS),
also may select “user defined” sensor via entering 8 point curves;
Display of generator cumulated electric energy;
Security password-protected programming levels;
Several crank success conditions are optional;
Built-in speed/frequency detecting units can accurately judge the states
such as crank success and over speed;
Power supply range is wide, accommodating to different starting battery voltage environments;
All parameters use digital modulation, abandoning analog modulation using
conventional electronic potentiometer,
reliability and stability are increased;
Built-in watch dog can never be dead halt, ensuring smooth program execution;
Modular configuration design, inserted type connection terminals, flush type installation,
compact structure, easy installation.
