Performance range
Capacity Q=25~8000 m3/h
Head H=60-1500m
Description of pump type
For example
CRKDY 200-100×6
CR: means made in CREDO PUMP
KDY-horizontal split multi-stage centrifugal pump
200-pump capacity is 200m3/h
100-single-stage head of pump is 100m
6-stage number is 6
KSY1900-105×2
KSY-horizontal split double-suction double-stage centrifugal pump
1900-pump capacity is 200 m3/h
105-single-stage head of pump is 105m
2-stage number is 2
KY 200-100×2
KSY-horizontal split single-suction double-stage centrifugal pump
200-pump capacity is 200m3/h
100-single-stage head of pump is 100m
2-stage number is 2
Construction
The pump is horizontal split casing. The pump inlet and outlet are located under split surface and are horizontally located on two sides of the pump casing, their centerlines are perpendicular to the pump axis.
It is unnecessary to disturb the motor and the pipeline for maintenance , so it is very convenient to operate. The type of the bearing are thrust bearings or rolling bearings. The bearings gets lubricated with dilute oil. The bearing can be cooled by air or by water. The shaft seal uses either packing seal or mechanical seal.
Complete provision range
Pump, motor, common bed plate , coupling shields can be supplied. Also can supply temperature detection system and detection system if the customer demand.
