hydraulic swing beam shear

NC hydraulic swing beam shear QC12K-4X2500

advanced technology
2-1, adopted advanced hydraulic system reduced the pipe joints steadiness and reliability
2-2,the setting surface of upper blade is screw this keep homogeneity of blade clearance while shearing the plate.
2-3,strore engage return back quickly.
2-4,upper blade is rhombus and rectangle for the down blade. Its material is 6CrW2Si with good hardness and long age.
2-5,the blade clearance can adjusted by hand wheel and the number marked on the plate. Adjust quickly and easily with good credibility.
2-6, blade stroke adjusted stepless, the pressure can adjusted according to the thickness automatically.
2-7,it has equipped with light to overlapping the draw line on the plate. gauge size and cutting times adopt staff counter ,operate very easy.
2-8,protective grating controlled by electrical system.
2-9,support device with ball to reduce the damage of the board.
2-11,oil cylinder used No 45 steel substrate inside hole boring precise.
2-12, piston rod: used No 45 steel substrate plating Chromium outside

Model QC12Y	Shearing Thickness	Shearing Width	Strokes	Back gauge Range	Shearing Angle	Main Motor Power
	(mm)	(mm)	(time/min)	(mm)	(.)	(kw)
4*3200	4	3200	18	20-500	1 30'	5.5
6*3200	6	3200	14	20-500	1 30'	7.5
8*3200	8	3200	12	20-500	1 30'	11
10*4000	10	4000	12	20-600	1 30'	15
12*6000	12	6000	6	20-600	1 30'	22
12*8000	12	8000	5	20-600	1 30'	22
16*3200	16	3200	12	20-600	2	22
16*4000	16	4000	8	20-600	2	22
20*4000	20	4000	5	20-600	2 30'	30
25*4000	25	4000	6	20-600	2 30'	37
32*3200	32	3200	5	20-600	3	37
40*3200	40	3200	5	20-600	3	45
50*3000	50	3000	5	20-600	3	90*3
50*6000	50	6000	5	20-600	3	90*5
60*3500	60	3500	5	20-600	3 30'	90*4