100M Network RJ45 Lightning Surge Protector For Security Monitoring Equipment

1. Name: lightning surge protection devices, industrial surge protector, video surge protector, network surge protector
2. Uc maximum sustained voltage: 8V
3. In nominal discharge current (8/20μs): 5KA
4. Maximum discharge Imax (8/20μs): 10KA
5. Insertion loss AE: <0.3db
6. Application: Security monitoring equipment, remote control and transmission

100M Network RJ45 Lightning Surge Protector For Security Monitoring Equipment

>Network Lightning Protection Device is mainly used in SWITCH, HUB, ROUTERT device and other surge protection.

>It can protect 10/100M twisted-pair Ethernet interface, suitable for multichannel network interface lightning surge protection.

>Ease of installation. Main Fine lines in the video signal-Surge / flow overvoltage protection, a road or road transport interface, fully meet user needs. monitoring works is the preferred product.

Features:

Rated discharge current, built-in semiconductor devices, fast response time;
With the flow, over-voltage, ground-clamp protection function
use standard connection, small volume, light;
good structure, easy in installation;
multi-functional protection

Applications:

Security monitoring equipment, remote control and transmission
figures public broadcasting system
Intelligent Community water, electricity, gas Table
Computer and network equipment and lightning protection

Complete machine features: 

Model: ONV-RJ45
Connecting form: RJ45
Uc maximum sustained voltage: 8V
In nominal discharge current (8/20μs): 5KA
Maximum discharge Imax (8/20μs): 10KA
Limit voltage Up: 20
Transmission rate Mbps: 1-170Mbps
Insertion loss AE: <0.3db
Protect line RJ45: 1.2.3.6;
Shell protect level: IP20;
Diemensions:6.5*2.5*2.5 cm
Response time: <25ns
Shell material: metal
Protection Level: Fine-level protection
Protect model: 3 grade filter press, fine-level protection
Ground Resistance Ω / diameter: ≤ 4 Ω / 2.5
 
 

Installment and Application:

1.  This products is in series in the I/O port;
2.  Protector line (IN) connected with signal channel; the equipment end (OUT) connected with protected input connector;
3.  The product’s grounding for lightening port and the machine room’s joined in junk ring;
4.  All the connecting should be fastness and connected with reliable electric;
5.  Lightning protection should accord with the requirements, the ground wire should be as tubbiness as possible, the ground resistance should be less than 10Ω;
6.  Ground wire ≥2.5m

Environmental requirements:

temperature: -40 to 70
Relative Humidity: indoor temperature conditions 30% ~ 90%

Order Information:

Accessories in the package: