About our product
KPX series flat carts are battery powered. The batteries are installed in the carts. The batteries supply electricity to the DC motor through the electrical control system. Then the reducer drives the wheels of the flat carts start, stop, go forward and backward, and the speed can be adjusted at the same time. |
| Cart frame, cart wheels,DC motor, speed reducer, accumulator, charger, electrical control box, attached pendant, remote controller,warning lamp |
1.No strict requirement for the railway construction 2.Safety, flexibility, stable start3.DC motor: big starting torque, small impact to the gear reducer, low voltage, long lifetime 4.Running distance is not limited. 5.Compared with KPJ and KPD flat carts, KPX series are more safe and flexible. |
1.It also can be used in the ferry condition and flammable, explosive environment. 2.This kind of transfer cart is suitable to be used in the long running distance transportation and low using frequency.3.It can be used in ferry condition. 4.It can run on turntables. 5.The turning rail transfer carts can run on the rails 'S', arc-shaped, direct running and so on. |
Parts achievements
| Singapore | Cable power transfer car | KPJ-15T | 1 SET |
| Australia | Battery power transfer car | KPX-60T | 1 SET |
| South Africa | Battery power transfer car | KPX-6T | 2 SET |
| Mexico | cable drum powered transfer car | KPJ-60T | 1 SET |
Technical parameter
| Model | KPX-10T |
| Rated Load(t) | 10T |
| Table Size(mm) | 3600*2000*500 |
| Wheel Base(mm) | 2600 |
| Rail Gauge(mm) | 1435 |
| Wheel Diameter(mm) | 300 |
| Wheel Quantity | 4 |
| Ground Clearance(mm) | 50 |
| Running Speed(m/min) | 0-25 |
| Motor Power | 1.6 |
| Battery Capacity(Ah) | 160 |
| Battery Voltage(V) | 48 |
| Running Time When Full Load | 4.8 |
| Running Distance for One Charge(Km) | 7.2 |
| Max Wheel Load(KN) | 42.6 |
| Reference Weight(t) | 4.2 |
| Recommended Rail Model | P18 |
Need further information, pls contact us.
