CF360T Working Parameter
Model | Chinafix CF360T |
Solder Type | Lead/Lead free |
SMD Type | Micro bga,BGA,CSP,QFP |
PCB Thickness | 0.5mm~4mm |
PCB Size | W50*D50~W455*D350mm |
Heating Mode/Power(Upper) | Hot-blast air /800W |
Heating Mode/Power(Bottom) | Hot-blast air /800W |
Preheating Mode/Power | IR 2400W |
PCB Location Mode | Shape or Tongs |
Drive Mode | Gear,Rack |
Control/Adjusting Mode | Touch Screen + PLC |
Temperature Range | Room Temperature 0~400°C |
Max Power | 4000W |
Supply Voltage | 110V / 220V |
Machine Dimension | 760mm(L) * 700mm(W) * 600mm(H) |
Machine Weight | 36KG |
CF360T characteristic:
Intelligent Mute, Pre-warning when curve end up, precise temperature-control, operation audio-visually
1, The hot-air part adopts exported long-life heating coil, through special insulation heating treatment, heating uniformlier, long-life to use well.
2, The design of three warm area support, can fine adjust to support height, avoid welding-area to sink.
3. The upper hot air-flow can be adjusted, use different air-flow to different chips, preciser temperature, it's not easy to make expand.
4, Overtemperature protection function,over the temperature, heating coil automatic power off.
5, Intelligent mute function, keep mute under non-working condition.
6, New type design of air outlet with mixed wind, air-out temperature uniformilier.
7, Machincal part adopts oxidation treatment, main machine box use thicken material, prevent shapeless at whole hog.
8, Upper heating part continue to use high-grade products' design of move by X/Y shaft, treating all kinds of shapeless chips easiler.
9, Three warm areas can be controlled separated, to achieve the function of soldering and dry.
10, Complete machine construction adopts the only design of dismounting easily, exchange electric parts simply and conveniently, warranty with fast speed, machine's rate of utilization reaches the highest.
11, Allocate vacuum attaching-pen, automatic start when ending heating, take down chips easily.
12, Warning function on the peak temperature, warn before ending up curve heating 30s ago, conveniently manual interveniton.
13, Warn when ending the curve.
