SMC style parallel air gripper MHZ2 series.
With the same SMC MHZ2 series parallel air gripper appearance, equivalent to SMC.
Integral linear guide used for high rigidity, and high precision.
A wide variety of types and broad size variations.
General purpose compact grippers with integral guide that provides high rigidity and high accuracy.
Bore size(mm): 6, 10, 16, 20, 25, 32, 40.
Double acting or single acting.
Built-in magnet, Sensor slots on 2 sides.
Long service life, easy to maintain and operate, Low cost.
Detailed specification is as below:
Detailed specification is as below:
6 | 10 | 16 | 20 | 25 | 32 | 40 | ||
Fluid | Air | |||||||
Action | Double acting, Single Acting | |||||||
Operating pressure (Mpa) | Double acting | 0.15 to 0.7 | 0.2 to 0.7 | 0.1 to 0.7 | ||||
Single acting | 0.3 to 0.7 | 0.35 to 0.7 | 0.1 to 0.7 | |||||
Ambient and fluid temperature | –10 to 60°C | |||||||
Repeatability | ±0.01mm | ±0.02mm | ||||||
Max. operating frequency | 180c.p.m. | 60c.p.m. | ||||||
Lubrication | Non-lube | |||||||
Auto Swith (Option) | Solide state switch (3-wire, 2-wire) | |||||||
Port size | M3 x 0.5 | M5 x 0.8 | ||||||
Main material components:
No. | Description | Material | Note |
1 | Body | Aluminumalloy | Hardanodized |
2 | Piston | Φ6to Φ16: Stainless steel | Φ20to 40: Hard anodized |
Φ20to Φ40: Aluminum alloy | |||
3 | Lever | Stainlesssteel | Heattreated |
4 | Guide | Stainlesssteel | Heattreated |
5 | Finger | Stainlesssteel | Heattreated |
6 | Rollerstopper | Stainlesssteel | |
7 | Levershaft | Stainlesssteel | Nitriding |
8 | Cap | Φ10,Φ16:Stainless steel | Φ32to 40: Clear anodized |
Φ6,Φ20 to Φ40: Aluminum alloy | |||
9 | Bumper | Urethanerubber | |
10 | Rodseal/Piston seal | NBR |
