Application:
It is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on.
It is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on.
The series ZYD-I Double-stage vacuum Transformer oil regeneration purifier not only provide dewaters, degases and remove impurities, but also remove acidity, sludge, free carbon, other soluble oil decay products and discoloration.
Also it can vacuum filling oil to transformer, vacuum dry transformer and on-line operation transformer. Because Series ZYD-I have double-infrared fluid level auto-control systems and Germany's 3UG3 Phase relay which can auto-control oil inlet and outlet. So it can absolute guarantee the oil purifier constant cycle. So will also ensure there have constant oil in transformer in different circumstances. So series ZYD-I can work with energized transformer.
Feature:
1. This machine is high effective and portable, which is very suit to operate on line. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
2.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
3. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.
4. High absorption speed, absorption speed power more than 333L/Sr.
5. Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively.
6. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effect.
7. Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
9. The oil of any grades can be treated on line at the working site.
10. The Automatic oil purifier model is installed with PLC (Programmable logical control system) which can control the equipment automatically to every stage of its process and ensure its process and ensure its safe operation on site and on line without human supervision.
11. Can be operated both on-line and off-line.
Advantage:
Comparing with the single-stage vacuum oil purifier, series ZYD-I adds ROOTS vacuum system, second stage of separating system to improve the effect of purification which dewaters, degases and removes impurities more quickly, more completely and make the oils limiting voltage-withstand value much higher. This machine also can remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly. As the bridge-type vacuum linking system that can filter and be an independent vacuum power supply, this machine can be vacuum treating the electric insulating devices.
V Oil Data After Treatment
Comparing with the single-stage vacuum oil purifier, series ZYD-I adds ROOTS vacuum system, second stage of separating system to improve the effect of purification which dewaters, degases and removes impurities more quickly, more completely and make the oils limiting voltage-withstand value much higher. This machine also can remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly. As the bridge-type vacuum linking system that can filter and be an independent vacuum power supply, this machine can be vacuum treating the electric insulating devices.
Technical Data
Parameters | Unit | ZYD-I-30 | ZYD-I-50 | ZYD-I-100 | ZYD-I-150 | ZYD-I-200 | ZYD-I-250 | ZYD-I-300 | |||||||||
Flow rate | L/h | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |||||||||
Working vacuum | MPa | -0.08-0.099 | |||||||||||||||
Working pressure | MPa | ≤0.3 | |||||||||||||||
Temperature range | ℃ | 20 80 | |||||||||||||||
IFT | dynes/cm | ≥40 | |||||||||||||||
Power | 3 ph 208V 60Hz | ||||||||||||||||
Working noise | dB(A) | 75 | 75 | 75 | 75 | 80 | 80 | 80 | |||||||||
Heating power | KW | 30 | 30 | 45 | 60 | 75 | 90 | 120 | |||||||||
Total power | KW | 35.5 | 37.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 | |||||||||
Oil Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 | |||||||||
Weight | Kg | 600 | 800 | 1050 | 1400 | 1800 | 2000 | 2200 | |||||||||
Overall (Inside part) | Length | mm | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 | ||||||||
Width | mm | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 | |||||||||
Height | mm | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 | |||||||||
V Oil Data After Treatment
Moisture | PPM | ≤3 |
Gas content | % | ≤0.1 |
Impurities degree | μm | ≤1, no free carbon |
Breakdown voltage | KV | ≥75 |
IFT | dynes/cm | ≥40 |
Acid value | mgKOH/g | ≤0.01 |
Colour | L | 0.5 |
Dielectric loss factors | 90℃ | ≤0.001 |
