etailed Product Description
1.Non woven
2.Fibers and binder distributed equally
3.Smoothy surface, good ligh transmission
4.Moderate hardness
2.Fibers and binder distributed equally
3.Smoothy surface, good ligh transmission
4.Moderate hardness
Technical specifications:
R2O Content: <0.8%
Filament diameter: 11um-13um
Moisture: ≤0.2%
Loss on Ignition: 2%-9%
Binder Type Powder or Emulsion
Compatible Resin: Polyester
Styrene Solubility <50seconds
Product Characteristics:
1. Quick wet-out with resins,degassing properties,easily fills mold and conforms to complex shapes.
2.Fiber and binder evenly distributed without defects of fuzz,oil spot,and blots.
3.High mechanical strength and high wet strength retention.
Product code | Width(mm) | Compatible resin | Breaking Strength(N/150mm) |
EMC80 EMC100 EMC120 EMC150 | ≤3200 ≤3200 ≤3200 ≤3200 | EP/UP EP/UP EP/UP EP/UP | 30 30 30 35 |
Special:products are according to customer's requirements.
Individual and bulk packaging:
Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.
Each standard pallet with the size of 1020mm×1280mm×120mm contains 20 of rolls with the packaging type of 4x5.
Static stacking of the pallets is possible up to one high.
Storage:
The EMC should be stored dry and in its original packaging.The best conditions are temperature between 10°C to 35°C and at a relative humidity between 35% to 55%.
Individual and bulk packaging:
Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.
Each standard pallet with the size of 1020mm×1280mm×120mm contains 20 of rolls with the packaging type of 4x5.
Static stacking of the pallets is possible up to one high.
Storage:
The EMC should be stored dry and in its original packaging.The best conditions are temperature between 10°C to 35°C and at a relative humidity between 35% to 55%.
.jpg)
.jpg)
.jpg)
