Q Switched ND YAG Laser Beauty Equipment For Tattoo / Hair Removal
Machine structure:
The ND: YAG Laser Tattoo Removal Beauty Equipment is made up of light route system, power supply system, computer controlling system, cooling system, etc. The light route system is installed into the hand piece, but power supply, controlling and cooling system are installed into the machine box of power supply.
Main technical parameters:
Laser model: Q-switched ND: YAG Laser
Laser wavelength: 1064/532 nm
Pulse energy: 1000mj
Pulse width: 8ns
Repetition frequency: 1, 2, 3, 4, 5, 6 Hz
Cooling method: Inner circulation water cooling
Power supply: AC110V± 10%, 50~60Hz; 230V± 10%, 50~60Hz
Main physical parameters:
Dimensions: 370× 275× 245mm3
Total weight: 18kg
Each part's name and function:
1. Emergency switch: When accident happened suddenly, press the red knob swiftly, then the machine is out of power. Turn the button in the arrow direction to spring it up and power resumes again.
2. Key switch: This is the main power supply switch. The screen displays a long horizontal line. Press the "down" button to shut down the signaling voice.
3. Simm (simmer): Pressing the knob makes system enter into the standby state.
4. Freq (frequency adjusting ) key: Set repeated frequency 1~6Hz.
5. Power (power adjusting) key: This is the keys that can adjust energy higher and lower. During operation, every time when "+" is pressed, its energy will increase by 20mj. Every time when "-" is pressed, its energy will decrease by 20mj.
Working condition
Normal working condition:
1. Temperature: 5° C-30° C
2. Relative humidity: ≤ 70%
3. Pressure: 860-1060hPa
4. Power supply: AC110V± 10%, 50~60Hz; 230V± 10%, 50~60Hz
Working mode: Interval and continuous working mode. Best to pause for 5 minutes after each continuous outputting of 5000 pulses.
Cooling: Circulatory water cooling with distilled water
