Modular Structure Shrink Wrapping Machine With Continuous Motion

Modular Structure Shrink Wrapping Machine With Continuous Motion

Description

Shrink wrapping machine is an automatic packing equipment which continuously unfold the film roll to cut the film at required length,and deliver the film by vacuum adsorption slope conveyor to the bottom of a group of container,the container continues to forward at the same time the revolving rod puts the film to wrap the container,and the film ends overlap to the film initial position under the container,then the wrapped plastic container is fed into a heating tunnel,finally form the film shrink wrapped product.The machine is composed by container feeding device,the container grouping and arrange device,firm stretching device,film cutting device,film delivering device and shrink film wrapping and shrink tunnel.It can be used to pack different containers,such as:plastic bottles,glass bottles,cans,jars or a plurality of small packaging.Packing capacity can be up to 150 packs per minute.

Application

System Advantage

1. Multi-pitch configuration

2. Modular structure

3. Flexibility

4. Perfect cases

5. Versatile packs

6. Motors directly connected to the drive shafts

7. User-friendly”man-machine interface

8. Easy and low-cost maintenance;

9. Plastic dividing combs

10. Continuous motion pack formation

1. Basic specification description

1.1Capacity:35 packs per minute

   1.2 Packing:film+tray

1.3 Bottle dividing: door type

1.4 Bottle shape:

(1)Glass bottle, PET bottle and can etc. Diameter: Ø55~110mm

(2) Bottle height: H80~320mm(Notice:each bottle diameter and height difference±2mm, otherwise thought as another bottle size)

1.5 Pack size

1. L210~450mm
2. W120~300mm
3. H80~330mm

1.6 Machine dimensions:

a. Main machine: 12560mm*1650mm*2600mm(L*W*H)

b. Infeed conveyor:  L3600mm,W730mm

c. Cardboard magazine: L2000mm, W540mm

1.7 Total power: 78.5 KW

1.8 Control power:24V DC

1.9 Compressed air   (a)Pressure:0.4~0.8MPa   (b)Air consumption:100L/MIN

1.10 Weight: 7.5T

1.11 Floor load : 8 X 7500 N

1.12 Horizontal angle : ± 1°

1.13 Noise :  ≤ 85 dB

2. Electric configuration:

2.1  Power supply: 380V(Max.±10%)50Hz 3PH+PE

2.2  Low pressure control: 24VDC

2.3  Electric cabinet protection grade:  IP54

2.4  Sensor : SICK

2.5  HMI : B&R

2.6  Control system:B&R control system

2.7  Motor:  SEW

2.8  Inverter: DANFOSS

2.9  Other electric parts protection grade no less than IP54

2.10 Pneumatic components: FESTO

Send message to this supplier

Ms. Jade Lam (Marketing Representative) Tel: 86-20-66809333 Mobile: 86-13544369860
	Enter between 20 to 3,000 chatacters.