AC3000E Antenna Control System is a set of antenna pointing control system with perfect function, it can manual or automatic control the antenna position pointing to the peak value of the receipt signal from the synchronous communication satellite. AC3000E antenna control system is designed with the latest digital processing technology, with the precise antenna pointing, high reliability and maximum flexibility in system configuration. The system has a storage capacity of multiple satellites, practical inclined orbit tracking capability , with input of RS-322, RS-422 or RS-485 remote control communication (Ethernet is optional). In addition, it is designed with the lightning protection to ensure stable system and reliable operation. AC3000E antenna control system can work well for various antenna control with the antenna of diameter below 10 meter.
The port connecting the AC3000E antenna control system and the tracking signal is serial port, any DC voltage of -5~+5V(Including satellite receiver AGC output, MODELDC output etc.
Configuration :
1) AC3000E antenna control system includes the following parts:
(1)AC3000E antenna control unit(ACU)
(2) Antenna driver unit(ADU)
(3) A set of cable with maximum 50 meters length (cable with over 50m's length is optional)
(4) A set of ACU AC power international standard cable and D-type install plug.
2) AC3000E antenna control unit (ACU) is consist of the following parts:
The central processing board(Including coding, A/D conversion, etc.), power amplifier(two-axis or three-axis), DC power, Plasma display, keyboard and Chassis, etc.
3) AC3000E antenna driver is consist of the following parts:
Motor,
antenna position sensor(Resolver /photoelectric encoder),
bidirectional limit switch.
logical Drive control panel
Air switch
Emergency stop
Az variable-frequency inverter
El variable-frequency inverter
24V DC power
Polarization control circuit (three axis/four axis system, optional)
Antenna position sensor(brushless single, two-speed resolver, photoelectrical encoder)
Position sensor can be single speed, two speed, and two speed can be selected as required from 1:16 to 1:128.Photoelectric Encoder can be selected from 14 to 20. All these can be selected according to control requirements/user needs. 
