CO2 Fractional Laser Skin resurfacing / renewing Machine , 0.530 W
Product Description
Application:
Skin renewing and resurfacing
Wrinkle removal, skin tightening
Acne and acne scar removal
Smooth burnt scars and surgery scars, etc
Remove intractable chloasmas and pigmentation
Sun damage recovery.
How it works
CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny DOT or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.
System Advantages:
1. Rapid operating speed---relieve effectively patients pricking and faster operation.
2. Random scan mode---reduce thermal injury on tissue and aid to recovery time.
3. 3 scan shapes, wide scan ranges.
4. Smaller focus spots, reach to dermis layer, collagen stimulative, smaller wound, non-pigmentation.
5. Scan density might be adjustable from 0.2mm to 2 mm, when operation you may select suitable scan density depend on pigment type, lesions location and other requirements.
6. Up to 5 degree scan mode on one position, specially used to scar treatment.
7. Repetitive operation mode_reduce power of work of the operator.
8. Perfect and friendly interface, more humanity easy handling.
9. Particular security detector---it is safety for patients while the scan motor(s) is on malfunction suddenly during operation.
10. Perfect handpiece design, easy to operation.
| wavelength | 10.6μ m, far-infrared laser |
| Pulsed radiofrequency | 0.530 W |
| Hyper-pulse |
1. Max power: 120W 2. Pulse width: 200 to 500μ s is optional |
| Pulse |
1. Average power: 0.5-20W 2. Pulse frequency: 33.3 Hz |
| Scan Graphics | Square, rectangle, round or customized graphics |
| Dot quantity | 400 dots at most |
| Working state | Hyper-pulsed mode |
| Scan mode | Sequence scan or Random scan |
| Pulse energy | 5mj to 80mj is optional for each dot. |
| Laser apparatus | Sealedoff laser device stimulated by direct current |
| Condenser focus | f=100mm |
| Beam divergence angle | 0.3 mrad |
| Spot size | Min 0.1mm at the focus |
| Max power intensity | 75, 000 W / cm² |
| Radiation time | 0.01 1 sec |
| Interval time | 0.01 1 sec |
| Aiming beam | Less than 2mW, 635nm red semiconductor laser |
| Beam transport device | Articulated arm with six segments and balance weight |
| Power supply | 220± 22V AC 50± 1Hz 10A |
