Removing Hair Q-switched 1064 NM Nd Yag Laser Scar Reduction
Specifications:
Light source ND: YAG Q-Switched laser
Wavelength 1064, 532 nm
Fluence range 4j/cm2- 24j/cm2 Repetition rate 1-5 PPS
Pulse duration 8-10 ns
Pulse energy 1064 nm: Single pulse > 750mj,
Multi pulse > 1500mj
532 nm: Single pulse > 350mj,
Multi pulse > 600mj
Spot diameter 2, 3.5, 5 mm
Product Description
High peak power laser pulses can not be delivered through an optical fiber, and so thus far, the transmission of Q-switched laser energy has been via a 7-mirror articulated arm. This relatively unchanged older design is plagued by numerous disadvantages. When the Q-switched laser pulse passing through the 7-mirror articulated arm, The pulse energy will be loss about more than 20%; Especially it has to be stressed that when moving the laser from one location to another will cause misalignment of the optics and decreases beam homogeneity which leads to the mirror degradation and hasten their eventual failure.
The portable Q-switched ND: YAG Laser systemClear Pioneer is designed and developed with the express of eliminating articulated arm and all of the optics of the delivery system by integrated the laser oscillator, amplifier and doubling frequency device into one hand piece directly. Otherwise a Cr4+: YAG as a passive Q-switch is used in this laser, so that the deliquescence of etectro-optic Q-switch device is avoided thoroughly. Using two high quality lamps in series for working at low load so that the lifetime will more than 107times. Without changing lamp for one year. Consequently, the repeatability and reliability of this system is unsurpassed.
The doubling frequency crystal-KTP can be inserted or taken away from the optical path only by a small knob without changing the doubling frequency efficiency So that the laser can operate at two fashions of only with 1064 nm or 1064+532 nm mixing. It is advantaged to the treatment. For changing the treatment spot size, a pull pole is designed to set on the top of the hand piece. In which there are three sections of different length to change the distance between the focusing len and lesion. So that three different diameter sizes of 2, 3.5, 5 mm can be easily obtained. All of Those specially designed devices are our patents.
