Hot stamping foil for LED mini emergency lamp

                                                                                                    
Advantages of Heat transfer printing
1\It can finish multi-color printing in one time,specially in the flat\curved\cylinder and conical surface of plastic material
2\Cut the number of production procedure,make it fast,easy and convenient.
3\With high efficiency in producing
4\Lower the producing cost
5\Without any environment pollution,meet the requirement of international non-toxic standard
6\It has high value added for the printed products ,which can bring much margin for you.

Procedure of Films production
1. Artwork we will make an layout design for you ,according to your given draft design and product detail  
↓
2.Confirm the artwork After you confirm the final design then we will start for the plate making
↓
3.Plate making It takes about 7~8 days
↓
4.Film printing Print in big rolls →drying → cut into small rolls →quality check
It takes about 4-5 days
↓                                                   
5.Packaging Polybag+drying agent+carton
↓
6. Delivery By express, by Sea, or by air →It's up to you

Six Features Of Hear Transfer Printing Process

1.It uses Inktrk ink for heat transfer printing,no need to offset.The design can once forming and no need to have color register also.
2.The designs look wonderful,only using normal hot stamping machines or heat transfer machines then can finish.
3.It uses C-AW heat transfer foils.It is easy to handle and the printing effect is good,which the producing cost is very low also.
4.It meets the printing standard of green environmental protection.It's safe to use and without any environmental pollution.
5.The loss of products is very low with high value additional and it's good for decoration.
6.With strong covering power and good performance of adhesive force.

The way to keep the film                                                                                                                                           
It 's well-known that the film is very much important for the heat transfer printing.It can be a big problem for the whole production if there is some storage problem of the films.So below are some tips for how to keep the heat transfer films in good condition:
1.The film rolls need to put vertically,cannot put horizontally in case the ink layer will come out because of the pressure
2.Note for the press and throw.As the ink layer on the films will be come off easily ,the films cannot be treated rudely.We have seen some production line worker sitting on one carton of films directly in our one client's factory.It's wrong to do like that because it will damage the films easily.
3.Keep the films away from heat,it's best to keep the films in 20-40℃.
4.The films should be kept dry.Once it becomes damp,it will create gas when heated to print the products,which will make the films have chemical action.Therefore,the films need to be kept in cool, well-ventilated and dry place to remain in the best condition.

Heat transfer printing LED mini emergency lamp


Hot stamping LED mini emergency lamp


Heat transfer film for emergency lamp


Hot stamping foil for emergency lamp


About Aeon Printing Materials Co.,Ltd
The main gate of us


The show room of us