Custom HS PVC Film Cooling Tower Fills for Counter Flow
Quick Detail:
· The film fill is probably the most thermally efficient fill worldwide.
· It is well adapted to any induced draft or natural draft cooling tower using normal industrial water quality.
· Sharp horizontal corrugations allow even water redistribution on the sheet and water rotation for good contact with air. The offset flute design allows vertical rotation of air with limited pressure drop.
Description:
· The filling has larger specific surface-area after several technological improvement, this prolongs detention time of drip on filling surface, make heat interchange of water and air more adequate, it is proved by testing that: Comparing to fillings which are applied widely in the market, on the precondition of comparative thermal performance, the airflow resistance of this kind of filling diminishes 8~20%
· It has the good characteristic of hydrophilicity, proof-oil, high-temperature-resistant, it doesn’t occur geometric alteration under condition of 65°C, and it won't crash and crack under condition of -40°C. Its anti-flaming oxygen index is more than 40.
· According to practically experience of similary project, the filling is bound by special adhesive, ratio of bonding is no less than 95%, intensity of flat crushing ≥3000 N/m2, shear intensity after being bound for 24 hours is more than 3.3Mpa.
· It has the good characteristic of hydrophilicity, proof-oil, high-temperature- resistant, anti-ageing. The strength of filling block is more than 300Kg/m2.
Applications:
COOLING TOWER
Specifications:
Sheet spacing:20mm
Thickness after forming:10mils
Sheet size: 304mm(608mm)×2400mm/ 304mm(608mm)×2000mm/ 304mm(608mm)×1200mm/ 304mm(608mm)×1000mm
Competitive Advantage:
1.Good Chemical and Physical Performance
2.Good anti-flaming performance
3.High strength of assembly
