Series TLH
rodless design
ball coupling avoids sideloads
long life up to 100 Mio.movements, depending on applications
outstanding linearity up to±0.02 %
Special features
rodless design
ball coupling avoids sideloads
long life up to 100 Mio.movements, depending on applications
outstanding linearity up to±0.02 %
high resolution - better than 0.01 mm
very high operating speed
Connector to DIN 43650 (hydraulic connector)
protection class IP 54- mounted "up-side-down
Designed for the direct, accurate measurement of displacement or length in control, regulation and measuring applications. The rodless design allows the actuator to be driven from the side, along the unit length, thereby avoiding the "pump" effect problems normally associated with conventional transducers, and allowing standard stroke length up to 3000 mm
A magnetically restrained stainless steel band completely covers the opening through which the actuator operates. The ball coupling is of a new design which prevents forces, generated through parallel or angular offsets, from being transmitted to bearing surfaces. Fixing is achieved through the use of clamps which permit fine adjustment after initial mounting.
Model No:
For example:
TLH 100,TLH 130,TLH 150,TLH 225,TLH 300,TLH 360,TLH 450,TLH 500,TLH 600,TLH 750,
TLH 900,TLH 1000,TLH 1250,TLH 1500,TLH 1750,TLH 2200,TLH 2250,TLH 2500,TLH 2750,
TLH 3000
rodless design
ball coupling avoids sideloads
long life up to 100 Mio.movements, depending on applications
outstanding linearity up to±0.02 %
high resolution - better than 0.01 mm
very high operating speed
Connector to DIN 43650 (hydraulic connector)
protection class IP 54- mounted "up-side-down
Designed for the direct, accurate measurement of displacement or length in control, regulation and measuring applications. The rodless design allows the actuator to be driven from the side, along the unit length, thereby avoiding the "pump" effect problems normally associated with conventional transducers, and allowing standard stroke length up to 3000 mm
A magnetically restrained stainless steel band completely covers the opening through which the actuator operates. The ball coupling is of a new design which prevents forces, generated through parallel or angular offsets, from being transmitted to bearing surfaces. Fixing is achieved through the use of clamps which permit fine adjustment after initial mounting.
Model No:
For example:
TLH 100,TLH 130,TLH 150,TLH 225,TLH 300,TLH 360,TLH 450,TLH 500,TLH 600,TLH 750,
TLH 900,TLH 1000,TLH 1250,TLH 1500,TLH 1750,TLH 2200,TLH 2250,TLH 2500,TLH 2750,
TLH 3000
