40VK6 TE 2-6609028-3 Corcom 2-1609028-3

K Series
Suitable for high impedance loads
Well suited to applications where pulsed, continuous and/or intermittent RFI interference is present
E

*1-15A: IEC 60320-1 C14 inlet mates with C13 connector
20VK7: C20 inlet mates with C19 connector
Available Part Numbers

1VK1	10VK1	1EK1	10EK1
1VK3	10VK3	1EK3	10EK3
2VK1	10VK6	2EK1	10EK7
2VK3	10VK7	2EK3	10EK7M
3VK1	10VK7M	3EK1	20EK1
3VK3	20VK1	3EK3
3VK7	20VK6	3EK7
3VK7M	20VK7	3EK7M
5VK1	30VK6	5EK1
5VK3	30VK6C	5EK3
5VK7	40VK6	5EK7
5VK7M	40VK6C	5EK7M
	60VK6

Specifications

Maximum leakage current, each Line to Ground:
		VK Models	EK Models
	@ 120 VAC 60 Hz	.5 mA	.21 mA
	@ 250 VAC 50 Hz	1.0 mA	.36 mA
Hipot rating (one minute):
	Line to Ground	2250 VDC
	Line to Line	1450 VDC
Operating Frequency:		50 / 60 Hz
Rated voltage (max.):		250 VAC
Rated Current:		1A to 60A
		20VK7 VDE approved to 16 Amps
Operating Ambient Temperature Range (at rated current Ir):
		-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45

Electrical Schematics

30 & 40VK6C

Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord

Case Styles
K1 (1, 2, 3, 6, 10A)

Typical Dimensions:
	Line/Load Terminals(4):	.250 [6.3] with .07 [1.8] Dia. hole
	Ground Terminal(1):	.250 [6.3] with .07 x .16 [1.8 x 3.8] slot
	Mounting Holes (2):	.188 [4.75] Dia.

Typical Dimensions:
	Line/Load Terminals(4):	.250 [6.3] with .07 [1.8] Dia. hole
	Ground Terminal(1):	.250 [6.3] with .07 x .16 [1.8 x 3.8] slot
	Mounting Holes (2):	.188 [4.75] Dia.

10VK6

Typical Dimensions:
	Terminals (5):	8-32 Torque 18 lbf-in. [2.03 N-m] max. ±2[.22]
	Mounting Holes (2):	.188 [4.75] Dia.

20VK6

Typical Dimensions:
	Terminals (5):	8-32 Torque 18 lbf-in. [2.03 N-m] max. ±2[.22]
	Mounting Holes (2):	.188 [4.75] Dia.

Typical Dimensions:
	Terminals (5):	8-32 Torque 18 lbf-in. [2.03 N-m] max. ±2[.22]
	Mounting Slots (4):	..250 x .156 [6.35 x 3.96] Dia.

Typical Dimensions:
	Terminals (5):	1/4-20, Torque 56 lbf-in. [6.32 N-m] max. ±2[.22]
	Mounting Slots (4):	..250 x .156 [6.35 x 3.96] Dia.

K7 & K7M (3, 5, 10A)

Typical Dimensions:
	Load Terminals(2):	.250 [6.3] with .07 [1.8] Dia. hole
	Ground Terminal(1):	.250 [6.3] with .07 x .16 [1.8 x 3.8] slot
	Line Inlet (1):	IEC 60320-1 C14
	K7 Inserts (2):	6-32 x 1/4
	K7M Inserts (2):	M3x.5

20VK7

Typical Dimensions:
	Load Terminals(2):	.250 [6.3] with .07 [1.8] Dia. hole
	Ground Terminal(1):	.250 [6.3] with .07 x .16 [1.8 x 3.8] slot
	Line Inlet (1):	IEC 60320-1 C20
	K7 Inserts (2):	6-32 x 1/4
	K7M Inserts (2):	M3x.5

Recommended Panel Cutouts
K7 & K7M Cutout (3, 5, 10A)
tolerance ± .005 [0.13]
Back mount only
20VK7
Case Dimensions

Part No. A B C D E (max.) (max.) (max.) ± .015 (max.) ± .38 1VK1, 1EK1, 2VK1, 2EK1 3.1 2.07 0.91 2.375 2.81 78.7 52.6 23.1 60.33 71.4 1VK3, 1EK3, 2VK3, 2EK3 1.81 2.07 0.91 2.375 2.81 46.0 52.6 23.1 60.33 71.4 3VK1, 3EK1, 5VK1, 5EK1 3.10 2.07 1.16 2.375 2.81 78.7 52.6 29.5 60.33 71.4 3VK3, 3EK3, 5VK3, 5EK3 1.81 2.07 1.16 2.375 2.81 46.0 52.6 29.5 60.33 71.4 3VK7, 3VK7M, 3EK7, 3EK7M, 5VK7, 5VK7M, 5EK7, 5EK7M 3.21 2.25 1.28 1.575 0.63* 81.5 57.2 32.5 40.01 16.0* 10VK1, 10EK1 3.35 2.07 1.16 2.375 2.81 85.1 52.6 29.5 60.33 71.4 10VK3, 10EK3 2.07 2.07 1.16 2.375 2.81 52.6 52.6 29.5 60.33 71.4 10VK6 3.46 2.07 1.16 2.375 2.81 87.9 52.6 29.5 60.33 71.4 10VK7, 10VK7M, 10EK7, 10EK7M 3.71 2.25 1.28 1.575 0.63* 94.2 57.2 32.5 40.01 16.0* 20VK1, 20EK1 3.35 2.56 1.53 2.938 3.35 85.1 65.0 38.9 74.63 85.1 20VK6 3.46 2.56 1.53 2.938 3.35 87.9 65.0 38.9 74.63 85.1 20VK7 3.8 2.28 1.78 1.575 .846¹ 90.4 54.6 39.6 74.63 85.8 30VK6, 30VK6C 5.34 3.38 1.53 3.75 4.20 135.6 85.9 38.9 95.25 106.7 40VK6, 40VK6C 5.34 3.38 1.53 3.75 4.20 135.6 85.9 38.9 95.25 106.7 60VK6 6.00 3.38 1.53 3.75 4.20 152.4 85.9 38.9 95.25 106.7 * ± .02 [.05] ¹ ± .01 [.025]
Performance Data Typical Insertion Loss Measured in closed 50 ohm system EK Models 1 & 3 EK 2 & 10EK 5EK 20EK VK Models 1VK 2VK 3VK 5VK 10VK 20VK 30VK & 30VK6C 40VK & 40VK6C 60VK Minimum Insertion Loss in dB: Measured in closed 50 ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) Current Rating Frequency - MHz .15 .5 1 5 10 30 VK Models 1A, 3A 15 30 38 50 50 50 2A, 5A, 10A 6 19 28 42 45 50 20A 6 19 28 42 45 50 30A, 40A 6 19 28 42 45 50 60A 6 22 28 32 39 35 EK Models 1A, 3A 15 29 35 45 45 50 2A, 5A, 10A 8 19 25 38 40 45 20A 8 19 25 38 40 45 Current Rating Frequency - MHz .15 .5 1 5 10 30 VK Models 1A, 3A - - 48 55 50 35 2A, 5A, 10A - - 30 50 30 30 20A 6 6 30 50 30 30 30A, 40A 2 40 60 65 57 55 60A 13 49 67 57 53 53 EK Models 1A, 3A - - 48 55 50 35 2A, 5A, 10A - - 30 50 30 30 20A 6 6 30 50 30 30