INTRODUCTION:
The advanced wind/solar hybrid controller is specially designed for wind system or high-end small-scale wind solar hybrid system, and especially suitable for wind/solar hybrid street light system& wind/solar hybrid monitoring system.The controller can control wind turbine or wind turbine and solar panel at the same time and transform the wind&solar energy into electricity for the DC load use, with excess energy stored into batteries. Varieties of appearance and function design, which is flexible to meet the requirements of different customers.
when you are buying it, pls choose what's kind of your wind turbine ? three phase AC output, single phase DC output or single phase AC output ? we will send the exact controller to you.
PERFORMANCE FEATURES:
- Superior military-grade components to ensure the product stability.
- Perfect protection function, thus the system has higher reliability.
- Check and set all operation parameters as requirement from LCD display.
- Voltage limiting and current-limiting charge mode, ensures battery in the best charging status.
- Two DC Load output, light-control, time-control, constant output, and multiple output control mode selection.
- PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status.
- Design of high quality aluminum alloy appearance, with small size and good cooling effect.
- European CE certification.
TECHNICAL PARAMETERS:
Model | SG-WCL60024 |
Rated Battery Voltage | 24V |
Rated Wind Turbine Power | 600W |
Wind Turbine Maximum Input Power | 1000W |
Rated Solar Power | 300W |
Wind Turbine Maximum Input Current | 40A |
Unload Voltage(factory default) | 28V |
Unload Current(factory default) | 25A |
Dumpload Start Voltage(factory default) | 27V |
Charge Shutoff Voltage(factory default) | 29V |
Wind Turbine Brake Current | 25A |
Battery Over Discharge Protection Voltage | 21.6V |
Battery Over Discharge Recovery Voltage | 24V |
Output Over Voltage Protection | 32V |
Light Control On Voltage (Factory Default) | Adjustable(2V) |
Light Control Off Voltage (Factory Default) | Adjustable(3V) |
Load 1 Rated Output Current | 10A |
Load 2 Rated Output Current | 10A |
Load 1 Output Mode(Factory Default) | 3 Modes Selection(Light-Control On and Light-Control Off) |
Load 2 Output Mode(Factory Default) | 3 Modes Selection(Light-Control On and Time-Control 5 hours Off) |
Control Mode | PWM |
Display Mode | LCD |
Display Parameters | Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage, Over Voltage, Under Voltage, Over Load, Short Circuit, Night. Etc |
Working Temperature & Humidity | -20~+55℃/35~85%RH(Without Condensation) |
Temperature Compensation(optional) | -4mV/℃/2V ,–35℃--+80℃, Precision:±1℃ |
Communication Mode(optional) | RS232\RS485\RJ45\GPRS. Etc |
Quiescent Current | ≤20mA |
Weight and Size | 142×150×82mm,1.9kg |
Protection Function | Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection, Battery over discharge protection, Battery reverse connection protection, Lightning protection Wind turbine current limiting, Wind turbine automatic brake and manual brake. |
Optional Function | Optional Function 1 : RS Communication and Matched Software . Install the matched software to computer and connect controller with Computer Via software. User can adjust parameters from software by themselves. User can know the state of whole system Via software. All data will be stocked into excel files from software.(add USD:85) |
Optional Function 2: Low Voltage Charge Function. With this function Controller can start charging battery when wind turbine voltage is lower than battery bank voltage , For example ,Controller can start charging battery from 2V if runs in 12V battery bank(add:USD:130 with function 1) | |
In order to serve our customers better. Our company can adjust parameters configuration according to customer's requirement. | |
