Cat5e Patch Panel CAT5e-48-D

1With keystone jack modules used for 19"cabinet, Complete metalation and reed construction, modularization design
2IDC: Phosphor bronze and silver plating (20-50uinch), suitable diameter 0.4-0.6mm, durability 200 cycles
3Contact pin: Phosphor bronze and gold plating (20-50uinch), mating durability not less than 750 cycles
4Anti-burn performance: Plastic part made from PPO and PC, meeting the international standard
5Intermediate resistance: No more than 2.5m ohm in normal atmosphere pressure (not including bulk resistor)
6Insulated resistance: No less than 1, 000M ohm in normal atmosphere pressure
7The intensity of anti-currency: DC 1, 000V (AC, 700V) No puncture and flash-over phenomenon in one minute. Accord with industry standard
8Label: Clear label to ensure easy to manage
9Type: 16/24/32/48 ports, Voice patch panel.
10Standard: Designed by international ISO/IEC11801
11Adopt KORNE 45 IDC to make wire-termination reliable, suitable for use LSA insertion tools.

FEATURE
- FRIENDLY INSTALLATION: 90 DEGREE BETWEEN JACK & IDC, TO SAVE STRENGTH WHEN
PUNCHING THE WIRES
- SUPPORT BAR: AVOID CABLE OVER BENDING
- GHMT CAT. 6 CHANNEL CERTIFIED PERFORMANCE
These Cat 5E patch panels may be used with matching Cat 5E jacks or as discrete components.
Available in 1U 16 and 24 port and 11/2U twin deck 32 and 48 port variants. All are fully compliant with ANSI/TIA/EIA 568b2.1 and ISO 11801: 2000 standards and feature a robust metal construction.

All ports are number identified or, alternatively, the supplied adhesive label can be used to provide individual port identification.
Each PCB connection is colour coded to 568B for individual conductor identification. While the integral cable management area provides fixing points for each cable. The cable fixing points are designed for maximum ease of use. Simply fit the cable tie loosely to the cable, slide over the fixing point and tighten.
DESCRIPTION: 24 Ports Cat. 5e Unshielded Patch Panel
Specifications:
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.
Meet TIA/EIA TSB-40
Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173
Termination: Krone Type
Electrical:
According to UL 1863
Current rating: 1.5 Amp Max.
Voltage rating: 150 Volts
Contact resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
Materials:
Housing: PC UL94V-0
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Contact: PC UL94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 u" to 50 u" Gold plating on contact area.

KORNE ATYLE IDC PATCH PANEL
19" Unshielded Patch Panel
Cat5e Patch Panel
Unshielded Patch Panel
1U Patch Panel