WS-3515 Brushless DC Motor Driver / Controller 15VDC - 50VDC 15A
Specifications
brushless dc motor controller/driver
1.DC voltage 15VDC-50VDC
2.PWM Frequency over 12KHZ
3.The most driving current 15A
brushless dc motor controller/driver
NOTE:
1. +AT,-AT port is outside DC power supply
2.U port for motor U pin
3. V port for motor V pin
4. W port for motor W pin
5. +5V for sensor power
6. GND for sensor or control GND
7. HALL A is sensor A input
8. HALL B is sensor B input
9. HALL C is sensor C input
10. CW is for motor forward direction, active low
11. CCW is for motor reverse direction, active low
12. AD for motor speed(0-5V or 0-10V)
13. BRAKE port is braking input end,low level.
14.The driver has ACC potentiometer for start-up accelerationc, accelerating time from 0.1s to 3s, To adjust accelerating valuet with power off. Out-factory setting 0.1S.
15. SUB SPEED potentiometer is for auxiliary rotate speed adjustment.Different motor parameter need below adjustment.DA input voltage adjusted to 5V,if motor ing speed is not the highest speed, To rotate SUB SPEED potentiometer clockwise until motor reach to the max speed.
If DA port is less than 5V,motor has reached the max speed, DA port adjust to 5V now. To rotate SUB SPEED potentiometer anti-clockwise until motor reach to the max speed.
ELECTRICAL CHARACTERISTICS: (Tj=25°C)
1.DC voltage 15VDC-50VDC
2.Most output current 15A
3.insulating resistance over 500MΩ
OPERATING CONDITION AND PARAMETER:
1.cooling method: naturally and imperatively
2.condition;avoid soot and corrosive air
3.temperature: 0ºC-+50ºC
4.humidity: 40-89%RH.
