Bathroom Waterproof Tile Adhesive / Waterproof Caulking Sealant

Bathroom Waterproof Tile Adhesive / Waterproof Caulking Sealant

Cement-based polymer adhesive specially for  bonding marble on interior and exterior wall and floor. Marble is high strength, heavy, low water-absorption, back smooth and becomes yellow when meets alkali. PB-05 is high bonding strength, low alkali and avoids the marble becoming yellow. Suitable for bonding marble on cement mortar, concrete, Eterpan etc such strong substrates.
 

Product Description:

Pinbang Waterproof Caulking Adhesive is good strength and weather resistance, non-shrinkage, waterproofing. It is the ideal senior filling agent for pasting veneer stone, ceramic tile joint.
 

Product Features:

1. Good Strength, non-shrinkage, incrust, never depart.
2. Anti crack, anti penetration, anti mildew.
3. Anti-aging, long last color, environment friendly, non-toxic, anti-mould.
4. Coloured, many colour can be chose.
5. Reduce the sag which has bad influence on the decorativeness.
 

Scope of application:

Suitable for the joint filling of tile layed on both on wall and floor for interior and exterior wall.
 

Treatment of base plane:

Tile joint: Make sure that the joint clean, free of crumb or water. For porous tile such as clay tile, art tile. Wet the joint first.
 

Construction Technology:

1. Put the powder together with clean water into a big bucket and mix well.

2. Powder: Clean water = 10kgs: 2kgs.

3. Mix with electric until the slurry is even. Reduce or increase water according to actual situation.
4. Fill the slurry into the joint with knife. Do not leave hollow.
5. Clean the surface with cloth wet with clean water. For those coarse tile surface which are difficult to clean, use ceramic tile detergent.
 

Attention:

1. The working and construction temperature should be 5~40. No rain fall.
2. For those ceramic tile with coarse surface, prior filling test is needed to avoid un-thorough cleaning after application. Apply craft of seam treatment if necessary.
3. The mixed adhesive should be used up within 3~4 hours. The skin layer should be removed before use. Never mix again with water and use again without removal.
4. Keep from rain or touch within 3 hours after laying.
 

Dosage:

1. The amount needed according to the width, depth and the sizes of ceramic tile, which can be calculated according to the following (kg/):
(Tile length × Tile width)× Joint width× Joint depth× (1.8~2.0)
G= tile length + tile width (Marks: Length unit is mm).
2. Usage depend on tile size, thickness and joint seam.
 

Storage period:

12 months from the date of manufacture stored in a dry place in original un-opened bag
 

Technical Specification: