Fluorite jig separator, fluorite beneficiation equipment
There are many kinds of jiggers for different ores. Choosing a suitable jigger is necessary to improve teh jigging beneficiation efficiency. The equipment for fluorite beneficiation is floatation separation and gravity separation. The floatation separation is mainly for low-grade fluorite, and fine grain size embedded to gain high-grade fluorite powder. And floatation separation is the only way to get high-grade fluorite powder. The gravity separation machine is mainly jigger. As kind of gravity separation machine, it separates according to different densities of mineral and gangue to gain metallurgy fluoeite. Jigging gravity separation is the only way to get fluorite blocks.
Gongyi Forui Machinery Factory improves the AM30 jigger on foundation of resource of ore beneficiation to develop new-type fluorite jigger. This fluorite jigger is of large treatment capacity, high recovery rate, wide feeding range, good beneficiation efficiency. This jigger has gained great praises and has been welcome to many proveinces in China, and it is exported to Mongolia for fluorite blocks separation.
Illustration:
This mineral concentration jigging machine of 2LTC912/4A model is remolded on the foundation design of the original 2LTC-912/4 and AM-75 jig machine. It pertains to double-row & four-chamber & side-plug-fuse type. This model of ore beneficiation jigger can be adoptable for the large size with its large handling capacity.
Superiority:
Overcoming the shortcomings of 2LTC - 912/4 jig's graining processing and AM - 75 jig's difficulty of discharging large quantity, particle size, it is used in the beneficiation of kinds of metals and non-metals of large size.
Usage:
Widely used in all kinds of metal mines, metalloid mine, and city construction waste of pretreatment assignments.
Advantages:
1,Energy-saving, high efficiency and environment-friendly.
2,Small occupied area and large handling capacity.
3,Selected wide range and big particle size, Maximum to 50mm.
4,dealing of ore or slag of 30-50mm, with its good selecting efficiency
Technical Parameter:
| Model | Cross- Section Form | Column Quantity | Jigging Chamber Quantity | Jigging Area( m2) | Stroke Coefficient | Stroke (mm) | Frequency of Stroke (times/min) | Handling | Power (KW) |
| 2LTC-912/4A | Rectangle | 2 | 4 | 4.32 | 0.49 | 0-100 | 120-160 | 20-40 | 11 |
