CC1101 Wireless Module External Aerial Based On Arduino Module
Description:
- Working voltage: 1.8 V-3.6 V, recommend 3.3 V.
- 433 MHz spectrum use free license.
- Highest rate at 500 KBPS, which support 2-FSK, GFSK and MSK modulation mode.
-
Modify baud rate with software, better requirement for customers in different conditions of use:
High baud rate: faster data transfer rate
Low baud rate: more strong anti-jamming and penetration ability, the transmission
distance further - High sensitivity (1.2 Kbps down-110 dBm, 1% packet ber)
- Built-in hardware CRC(inspection wrong and point-to-multipoint address control)
- Lower consumption(RX, 15.6 mA, 2.4 Kbps, which 433 MHz)
- Can be programmed to control the output power, for all the support frequency can reach + 10 dBm
- Wake-up wireless, support low power electromagnetic wave activated,and wake on lower consumption device
- Before transmission channel access will be cleaned up automatically (CCA), named carrier protected reliably against detective system
- Fast frequency changes brought the right frequency synthesizer jumping system
- Module can be set address software, software programming is very convenient
- The standard DIP spacing interface, easy to embedded applications
- Separate 64 bytes RX and TX data FIFO
- Open the actual transmission distances of up to 200 meters above (depending on the specific environment and Communication baud rate, etc and decide)
Competitive Advantage:
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment
