My company provides you with quality products and dedicated service, welcome to visit our company.
The following is the standard data, we will do our best to follow the customers' requirements and the agreement to perform.
Production | API 5L PSL1 LSAW steel pipe |
| PSL | PSL1 |
| Process of manufacture | As-rolled,Heat-treated |
| Type of length | Fixed ruler and Double ruler |
| Type of pipe end | Belled end,Plain end,Threaded end,Plain end for special coupling |
| Inspection and Test | Tensile test,Hydrostatic test,CVN impact test,Non-destructive inspection and as agreed |
Chemical Composition
| Pipe/Steel grade | C(%)≤ | Mn(%)≤ | P(%)≥ | P(%)≤ | S(%)≤ | V(%)≤ | Nb(%)≤ | Ti(%)≤ |
| L175/A25 | 0.21 | 0.6 | 0.03 | 0.03 | ||||
| L175P/A25P | 0.21 | 0.6 | 0.045 | 0.08 | 0.03 | |||
| L210/A | 0.22 | 0.9 | 0.03 | 0.03 | ||||
| L245/B | 0.26 | 1.2 | 0.03 | 0.03 | c,d | c,d | d | |
| L290/X42 | 0.26 | 1.3 | 0.03 | 0.03 | d | d | d | |
| L320/X46 | 0.26 | 1.4 | 0.03 | 0.03 | d | d | d | |
| L360/X52 | 0.26 | 1.4 | 0.03 | 0.03 | d | d | d | |
| L390/X56 | 0.26 | 1.4 | 0.03 | 0.03 | d | d | d | |
| L415/X60 | 0.26 | 1.4 | 0.03 | 0.03 | f | f | f | |
| L450/X65 | 0.26 | 1.45 | 0.03 | 0.03 | f | f | f | |
| L485/X70 | 0.26 | 1.65 | 0.03 | 0.03 | f | f | f | |
| a.Cu≤0.5%;Ni≤0.5%;Cr≤0.5% and Mo≤0.15% | ||||||||
| c.Unless otherwise agreed,Nb+V≤0.06% | ||||||||
| d.Nb+VT+Ti≤0.15% | ||||||||
| f.Unless otherwise agreed,Nb+V+Ti≤0.15% | ||||||||
| g.No deliberate addition of B is permitted and the residual B≤0.001% | ||||||||
WT Tolerance
| Wall Thickness,t(mm) | Tolerances(mm) |
| ≤5 | ±0.5 |
| >5 to <15 | ±0.1t |
| ≥15 | ±1.5 |
OD Tolerance
| Outside diameter ,D(mm) | Tolerances(mm) | |
| Pipe except the end | Pipe end | |
| <60.3 | -0.8 to +0.4 | -0.8 to +0.4 |
| ≥60.3 to 168.3 | ±0.0075D | -0.4 to +1.6 |
| >168.3 to 610 | ±0.0075D,but maximum of ±3.2 | ±0.005D,but maximum of ±1.6 |
| >610 to 1422 | ±0.005D,but maximum of ±4.0 | ±1.6 |
| >1422 | as agreeed | |
| The pipe end incloudes a length of 100mm at each of the pipe extremities. | ||
Tensile Properties
| Pipe/Steel Grade | Yield Strength (Mpa/psi)≥ | TensileStrength(Mpa/psi)≥ |
| L175/A25 | 175(25400) | 310(45000) |
| L175P/A25P | 175(25400) | 310(45000) |
| L210/A | 210(30500) | 335(48600) |
| L245/B | 245(35500) | 415(60200) |
| L290/X42 | 290(42100) | 415(60200) |
| L320/X46 | 320(46400) | 435(63100) |
| L360/X52 | 360(52200) | 460(66700) |
| L390/X56 | 390(56600) | 490(71100) |
| L415/X60 | 415(60200) | 520(75400) |
| L450/X65 | 450(65300) | 535(77600) |
| L485/X70 | 485(70300) | 570(82700) |
LSAW Pipes Manufacturing Process
