Specifications
ZLJ series coal mine tunnel drilling rig is mainly used for various kinds of angles of relief hole, geological structure hole,
Electric rock drill
ZLJ series coal mine tunnel drilling rig is mainly used for various kinds of angles of relief hole, geological structure hole, put off fire hole, hole drainage gas. This drill adopts mechanical drive, hydraulic feed, with advantages of small volume, light weight, reliable performance, convenient operation, etc.
Use standard automobile transmission clutch, reliable performance, flexible manipulation, the bottom of the spare parts cost.
PARAMETER | ZLJ-350 | ||
DRILL DEPTH(m) | 100 | ||
DRILL HOLE DIA(mm) | Φ50~Φ89 | ||
DRILL PIPE DIA.(mm) | Φ42 | ||
DRILL BIT WITHOUT CORE | Φ50~Φ89 | ||
CORE DRILL BIT | Φ55~Φ75 | ||
VERTICAL SHAFT RATED ROTATE SPEED(r/min) | 373 | 209 | 122 |
VERTICAL SHAFT | 116 | 206 | 350 |
VERTICAL SHAFT SLOPE ANGLE | 0~360o | ||
VERTICAL SHAFT STROKE(mm) | 400 | ||
RATED PRESSURE(Mpa) | 8 | ||
FEEDING CAPACITY(kN) | 20 | ||
LIFT CAPACITY(kN) | 27 | ||
WIND LIFT CAPACITY(kN) | 10 | ||
WIRE BARREL CAPACITY(m) | 30 | ||
WIRE DIA.(mm) | 8 | ||
PUMP MODEL | YBC-12/80 | ||
MOTOR POWER(kW) | 5.5 | ||
DIMENSION(mm) | 1150×650×1150 | ||
WEIGHT(kg) | 500 | ||
