The R&S FSQ is the solution for all development and production measurement tasks. It offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard.
Key Facts
•Frequency range from 20 Hz to 3.6/8/26.5/40 GHz
•28 MHz signal analysis bandwidth, optionally 120 MHz
•Outstanding RF characteristics:
TOI typ. +25 dBm
1 dB compression point +13 dBm
84 dBc ACLR/3GPP with noise correction
173 dBm (1 Hz) displayed average noise level (DANL) with noise correction and R&S®FSU-B24 preamplifier
•Analysis of signals in the analog and digital baseband
•Numerous firmware applications extending the signal analysis capabilities
•16 Msample I/Q memory, expandable up to 705 Msample
Excellent RF performance for demanding applications
•Outstanding RF features
84 dB ACLR for 3GPP with noise correction
77 dB ACLR for 3GPP multicarrier signals (four adjacent carriers)
TOI > +20 dBm, typ. +25 dBm
1 dB compression +13 dBm
Displayed average noise level (DANL) typ. –173 dBm using noise correction (1 Hz bandwidth) and R&S FSU-B24 preamplifier
Phase noise –160 dBc (1 Hz) at 10 MHz carrier offset
Phase noise –133 dBc (1 Hz) at 10 kHz carrier offset
Signal and spectrum analysis in a single instrument
•Signal analysis with up to 120 MHz bandwidth
Signals from RF, analog or digital baseband
Up to 705 Msample (I and Q)
Low phase/frequency response
User-definable sample rate
•Best signal fidelity for modulation analysis
•Ready for analysis of multistandard, multicarrier transmitters Wide range of functions
With its wide range of functions, the R&S®FSQ is practically unparalleled on the spectrum analyzer market. Even the base unit includes all important functions.
•Channel filters from 100 Hz to 5 MHz
•RRC filters
•1 Hz to 50 MHz resolution bandwidth (RBW)
•Number of measurement points/trace selectable between 155 and 30 001
•Time-selective spectrum analysis with gating function
•Up to 80 measurements/s in manual mode
•SCPI-compatible GPIB command set
•GPIB command set compatible with the R&S®FSE/R&S®FSIQ and legacy HP spectrum analyzer
•Fast ACP measurement in time domain
•Statistical signal analysis with CCDF function
•RMS detector
•Transducer factor for correcting antenna or cable frequency responses
•Harmonic distortion measurement function
•Spurious emission measurements with up to 100 001 points, in up to 20 segments
•External reference from 1 MHz to 20 MHz in 1 Hz steps
•LAN interface 100BaseT (1 Gbit)
•16 Msample I and Q memory
