Name: LED RGB controller with RF control
Summary
This product is using 20 Key RF remote control and a simple and beautiful appearance. We can use it to turn on, turn off, change display modes, adjust the light intensity and change speed. Besides, it has the function of matching the code of the only RF remote control and any one of the controller or cancel it. And it has a memory function.
Features
1, The newest PWM control technology, declicate light performance, no flicker.
2, 15 meters RF remote control distance.
3, Many different modes can be displayed, we can control it simply and flexibly.
4, It can match the code of the only RF remote control and any one of the controller or cancel it.
5, Memory function.
6, Smart appearance, standard input and output port, easy installation and high cost performance.
Controller | |
Supply voltage | 12VDC 24VDC |
Loadable current | 5A*3CH 15A MAX |
Output channels | 3CH |
Output power | 180W(12V)/360W(24V) |
Control method | RE remote control |
Connection mode | common anode |
Changing number | 14(8 static color modes, 6 dynamic changing modes) |
Dimmering method | PWM |
Grey steps | 256 |
Protection | The power input polarity protection |
Remote Controller | |
Working voltage | 3VDC |
Remote control way | RF433.92MHz |
Controllable distance | 15meter |
Battery types | Libattery, CR2052 |
Key Number | 20keys |
Whole Controller | |
Working temperature | -200C -600C |
Identification | CE, RoHS |
Panel and interface specifications
------Panel and interface specifications of LED RGB controller with RF control
Control method
Adopt RF remote to control the led controller, which has 20 buttons, the function of each button as the table below
------Control method of LED RGB controller with RF control
How to realize the function of Match Code:
Match Code: press down the Match Code Button on the Controller and press down thebutton on the RF remote control at the same time, wait for the LED lamp flashing several times, then move away from the two buttons. Now the RF emote control and the Controller have been matched.
Cancel Match Code: press down the Match Code Button on the Controller and press downbutton on the RF remote control at the same time, wait for the LED lamp flashing several times, then move away from the two buttons. Now the RF remote control and the Controller have been canceled Match Code.
Note:
There are two keys used for multiplex key in the remote, theand, when static mode, they are brightness adjust keys, when dynamical mode, they are speed adjust keys.
To avoid the Battery power run out by extrusion during production and transportation, insulation film will be inserted between the battery and the circuit. Please take out the insulation film before use the remote.
The wiring and the typical product apply diagram
According to LED load, the controller can be powered as follows:
1. When the working current is less than 6Ausing DC terminal of the desktop power supply or terminal of the high power switching power supply. Please refer to picture①②.
2. When the working current is less than 15A using high power switching power supply. Refer to picture②
------The wiring and the typical product apply diagram of LED RGB controller with RF control
Installing caution
1. Please install the products by professional electrician.
2. This product can not waterproof, please put into water-proof tank if the clients want to use it outdoor.
3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temper-ature.
4. Please don't install this controller in lightening intense magnetic and high voltage fields.
5. Check if the voltage and power adapter suit the controller and LED lights.
6. Please make sure the wires can sufficiently load the LED lights for avoiding accident.
7. Please make sure all the wires are connected correctly before switching on the power.
After sales service
1. The customers enjoy lifelong technical support for our products.
• Free Warranty: The customers enjoy free maintenance or replacement for quality problems within one year upon date of purchasing.
• Paid warranty: If the free warranty time is overdue, we will charge certain cost of raw materials for repair or maintenance.
2. Following cases are excluded free warranty terms:
• Any defects caused by unauthorized removal, maintenance, modifying circuit, incorrect connections and placing chips.
• Any damages caused by negligence, inappropriate storing at high temperature and humidity or environment near harmful chemical.
• Any damages due to transporation, breaking, flooding water after the purchase.
• Product appearance seriously damaged or deformation.
• Any damages caused by earthquake, fire, flood, lighting strike etc force majeure of natural disasters.
3. Our company would take up the biggest responsibility to replace the same type and quantity accordingly.
4. The cilents please inform suppliers the faulty phenomena, using environment etc. for speeding up the maintenance process.
